Gypsum cardboard is more often used for mending of walls, it idle time in installation, allows to level not the most ideal surfaces, not the road. But there are also shortcomings – gipsokarnon not really strong, can crumble, and knowing this feature of material, there is a question of how to hang up a case on a plasterboard wall.
The equipment evolved very dramatically, devices for fixture to any material are enough now, it will help to hang up a case on a wall the hands, without resorting to the help of the master.
How to hang up a case on a wall from gypsum cardboard?
Actually, installation to such material not it and a difficult task.
If furniture not heavy, then for fastening it is enough to buy special butterflies of a dowel when they are twisted in a wall, from a reverse side of a butterfly the fixing device which is drawing in densely to a surface reveals.
On the same fastening it is possible to record an assembly lath, twisting it through each 10 cm on all length, such installation will help to distribute the weight of a product and will lower load of fastening unit.
That the design turned out strong, tap a surface of a wall and define location of profiles, twist a dowel in them. Also having used long anchors it is possible to fasten a lath in the main wall under plaster if a wall strong.
How to hang up a heavy case on a plasterboard wall?
At installation of heavy furniture it is necessary to work if there is desire, then there will be options for performance and this task.
- It is possible to remove the sheet of gypsum cardboard, to enclose wooden bar between profiles, to fix it to the main wall, to put a leaf into place and to fasten a lath to the prepared bar.
- If the previous option does not approach, then cut out in gypsum cardboard square openings in places of estimated fixture, and replace them with wooden inserts, aflush to a wall, inserts can be fixed on dense tiled glue, then installation should be put off and, having fastened bars anchors to a bearing structure, the robot it will be ready today.
- It is possible to make a false wall - such option assumes installation of additional laths under a case, they only fasten to a ceiling if it is strong or to use in addition thin, steel cables on which to suspend furniture.