About surprising feature of silver to disinfect water people knew in an extreme antiquity. Wonderful qualities of this metal are constantly used by priests. In old times in a well with fetid water lowered a silver mirror for some time — and water became suitable for drink again. It is possible to ionize water silver in house conditions.
It is required to you
- - ionator;
- - filter for water;
- - table silver or silver jug;
- - water.
Instruction
1. To ionize water in the ancient way, no electric devices are necessary. Wash up silver jug. It is possible to do without disinfectants, silver in itself is an excellent anti-septic tank. The jug has to be just clean. If you have no such ware, use silver forks or spoons.
2. Pour water in a silver vessel. Of chlorine and other impurity it is better to get rid in advance. Use any filter for water. Put a jug to cool, but not too cold place, far away from direct sunshine. It is the best of all to keep silver water in the dark place. On light it quickly loses the properties.
3. Let's water infuse approximately day. Silver ions will get into it without any your intervention. At contact with other substances, silver quite often loses the properties as hit from in an organism can be complicated. But in water the ions for a long time keep the activity. In this case the hydrated silver is formed. It is called still colloidal.
4. If there is no silver jug, pour water in any the glass, porcelain or enameled ware. Perhaps, only aluminum vessels do not approach. Lower a silver spoon or a fork in water. Previously wash up tableware. Just as in the first case, let's water infuse. The subject is larger — the less for this purpose it will be required to time. Ancient ways have one essential shortcoming - very difficultly to calculate a dosage.
5. If there is an opportunity, it is the best of all to get an ionator. It allows to regulate concentration of silver in solution. Besides, you will be able to receive ions of superpure silver. Before starting water ionization, attentively read the instruction in the device. There operating modes and an amount of water are specified.
6. Wash out a working part of an ionator. It is necessary to do it by warm water with application of means for washing of ware. You watch closely that water did not get inside. A metal tube, that is the cathode, it is better to remove at the same time, and to put on after processing. The silver anode is not removed.
7. Lower an ionator in a vessel with the necessary amount of water. Water has to be slightly higher than room temperature. The device itself will analyze its conductivity, and respectively - will set the mode of giving of current. On an ionator there is a lassie of the indicator. You watch closely her. After solution of silver is ready, she will go out. If it is interesting to you to watch an ionator in operating time, you will be able to notice how from the anode ions flow down. They are similar to slightly rather turbid loop.