The ship for fishing represents the tackle for a spinning allowing to expand its functionality. It is used for catching of large fish which rather seldom swims to the coast. The essence of catching is that the ship pulls the leading fishing line to which leads with front sights are tied. All this gives the chance to bring a bait to long distance.
How to make the ship for fishing?
Today it is possible to buy such boat in shop, there are even options with the motor, but they cost expensive. For this reason many prefer to do the ship for fishing by the hands as there are drawings and even step-by-step instructions. People do similar tackles not one decade and call them still sledge or a dragon. For work it is necessary to prepare pieces of polyfoam or wood better if it is an oak or a beech. Choosing other breeds of a tree, it is necessary to use water-repellent protector.
The instruction how to make the ship for fishing with own hands:
- Prepare two boards of the different sizes which thickness has to be 12-14 mm. Details have to have a trapeze appearance.
- On each prepared detail it is necessary to make slanting cuts. In plates it is necessary to drill openings which are intended for connection of parts of the basis and for installation of the main fishing line. They have to be the friend opposite to the friend not to break a design. For connection of details it is necessary to prepare 2 hairpins with a diameter of 6 mm with a carving and 4 nuts of M6. To attach a product to the main fishing line take a usual bracket which fastens to the basis by means of the screw and a nut of M4.
- Using the drawing of the ship for fishing, production process considerably becomes simpler and it is already possible to pass to assembly of a product. Using a drill diameter, as well as fasteners, drill openings. If it is wrong to pick up diameter, then the design will be rather weak and the desirable result will not manage to be reached. Using hairpins and nuts, connect details and attach a bracket.
- As two openings were made, the bracket can be rearranged also on other part of a detail. It gives the chance to catch fish at any current. The bracket has to be from that party where the movement of water is carried out.
- At this fabrication stage the hands of the ship for fishing it is necessary to think over ogruzk. The thing is that each swimming means, even at such tiny, has to have a waterline. The ready ship has to look out of water no more than on 2-3 cm. For this purpose it is possible to use plates from lead. They need to be attached to the lower part of boards, using glue or nail.
- That's all, the ship is ready to use. To attach a fishing line to a bracket, it is recommended to use a carbine with a vertlyuzhok. At distance of 5-7 m from the ship, it is possible to establish leads.
Recommend to lower the ship on water by means of a spinning so that runners at the same time fell by water.