On what turns to switch transfer – a question which with guarantee will not nonplus the driver this skill is included into the list of basic. And still quite often beginners are lost in its nuances.
How it is correct to switch transfers by car?
The transmission was invented optimizing operation of the engine at different speeds. Therefore there is an established ratio of this indicator, to be exact the speed of the motor of the car moving with any speed and concrete transfer. Recommendations about switching are provided in maintenance instructions of the car, and extreme high-speed level is noted here. So, on a car with a volume of cursor up to 2 l and the 5-staged transmission on the first transfer it is necessary to give 30-35 km/h, on the subsequent — no more than 60, 95 and 130 km/h respectively. It is possible to go with higher speed by low transfers only when overtaking — short time, the separation has to make no more than 10-15 km/h from recommended.
On what turns it is necessary to switch transfers?
However, without looking back at official instructions, many drivers establish themselves conditions at what engine speed to switch transfers. It also is clear: recommendations — the theory of the manufacturing overcautious person, and own opinion — the practice checked repeatedly. Therefore the majority of "skilled" are guided by the simple national rule: the golden mean lies between a maximum of torque and the highest power. For example, the passenger car with a cursor no more than 2.5 l will be able to reach optimum dispersal when switching to the highest transfer when speed reaches 3-4 thousand/min. That is, in other words, the option at which it is necessary to switch transfers on turns which will not be below an optimum indicator will be the best.
"