The abundance of modern materials for construction simply strikes. Producers constantly work on improvement of their quality, but here a trouble: quite often end result, that is ready construction does not answer the functions assigned to it. In the winter in it it is cold, and in the summer hot that forces owners to overpay for utilities. The correct warming can correct a situation.
First of all it is necessary to understand that warming of a facade is much more preferable than internal finishing with such properties. The fact is that when warming the temperature difference will be formed from within, and it is fraught with a condensate skaplivaniye. It will reduce the term of operation of the building, to promote formation of a fungus, mold and so forth. Today as the warming materials polyfoam, polysterol, mineral wool, etc. is used. When choosing heater it is necessary to consider quality of material from which construction and also the main characteristics of heater – air permeability, vapor permeability, hygroscopicity, heat conductivity and so forth is executed.
Than to warm the wooden house outside?
It is better to warm the house from such material mineral wool. It is soft, elastic, easy, well holds heat, is not subject to deformation and emergence of bridges of cold, is convenient in installation. After warming it is possible to board the building to leave initial appearance or to apply a plastic siding. It is better for that who wants to know than to warm the house from a tree outside, first of all it is necessary to provide vapor barrier as which aluminum foil, a polyethylene film or a special film-paroizolyator is used. The next stage carries out thermal insulation minvaty which then is covered with the waterproofing film.
Being interested, than it is possible to warm the house from a bar outside, you should not forget to fill laths over a waterproofing that will allow air to circulate freely between vapor barrier and a covering. The space is closed below the metal gauze that insects and rodents did not get into the house. A finishing stage carry out an external covering.
Than to warm outside the house from a gas concrete?
It is necessary to understand that the walls constructed of a gas concrete will have smaller heat conductivity, than separate porous blocks therefore it is necessary to warm houses from the gas-block, and it is better to do it by mineral or stone wool. For this purpose the basis is prepared at first for work, then paste mineral wool, and after a grid from fiber glass, and the final stage decorate a surface plaster or coloring.
Than it is better to warm outside the brick house?
Choosing heater, it is necessary to consider type of the used brick and a type of a laying. As the budgetary option polyfoam will be suitable for external thermal insulation. It has good heat conductivity, density, but is quite fragile and fire-dangerous. Extruded expanded polystyrene has characteristics, similar to polyfoam, but at the same time is stronger and technological at installation. It is the best of all for that who wants to know than to warm house walls outside, it is worth paying attention to new material – "warm" plaster. It possesses excellent sound insulation, vapor permeability and fire safety. However, such finishing weighs much therefore demands strengthening of the base.
It is possible to save, having at the same time warmed a surface and having revetted it with thermopanels. There is a wide choice of their invoice and color. And though price remains quite high, it with interest will pay back all expenses. That's all about heaters. Their range is rather wide that it was possible to choose for himself the most acceptable option based on the ratio of the price and quality.
"