Many owners of these devices are interested in such tricky question how what to do if the tablet froze up? The tablet is the device quite imperfect therefore to this problem it is necessary to be morally ready practically always. Most of people think that it concerns only cheap Chinese devices, but they very strongly are mistaken as models of the most known and popular brands quite often hang.
That it is the most clear to describe a problem of lag of the tablet, it is necessary to consider its main reasons.
Why the tablet freezes up?
There is the whole set of the reasons of this phenomenon, but they everything can be divided into two main signs: program and hardware.
Most often there is program failure, but in case nevertheless occurred hardware then it is necessary to know that without the assistance of the qualified specialist not to solve this problem.
The following is the most popular reasons of breakages of the tablet on hardware level: connection of the incompatible device, physical damage or failure of power supply.
The tablet freezes up at inclusion
If usual program failure can be solved reset, then lag of the tablet at inclusion (the tablet froze up on a prompt) is already real problem. Most often, as the reason of this phenomenon serves usual overheating.
For the solution of this problem just give it several hours in order that it cooled down. At this time you should not try to include it. If there is an opportunity, then it is the best of all to disconnect also during this period the battery.
As option if did not help above-stated, then involve hard reset. You remember one that if the tablet froze up and does not join, then the only thing that you should not do, so it to panic. Just begin to touch all above-stated actions.
How to switch-off the tablet if it froze up?
In this situation just reboot the device by means of the inclusion button. If it does not react to usual reset, then involve full (you remember that all data from it in this case are formatted).
In case the battery easily is removed, then just disconnect it for a couple of minutes.