Each man can carry out small household repair. For example, how to repair the crane if from it water drips, it is rather easy especially as all improvised materials will be in the house.
How to repair the crane if it proceeds?
For a start it is necessary to understand the cause of breakage. As a rule, trouble can happen because of wear of laying, buks or sealing glands. It is possible to correct all these breakages independently.
At first let's understand how to repair the current crane if laying wore out. For this purpose block water, turn off an axle box by means of an adjustable spanner and replace used up rubber kruglyashka on new. Now it is necessary only to collect a system, and breakage will be liquidated.
Replacement of an axle box demands slightly more efforts and material inputs. Experts do not recommend independently to try "to reanimate" the worn-out axle box. It not only will not help to correct a situation, but also will aggravate it. Therefore, get a new axle box better. Further, block water, turn off an old element and establish new according to the scheme which always is in a box with an axle box. From tools only the adjustable spanner will be required for this purpose. Only carefully fix an axle box, otherwise water will start over again filtering.
Now we will talk about how to repair the crane that it did not drip because of wear of sealing glands. For this purpose it is necessary to disassemble the mixer, to turn off an omental nut and to replace a detail. By the way, the sealing gland, of course, can be made independently, but more simply and cheaper will be to buy a detail in shop.
How to repair the sharovy crane?
Most often hit of dirt between laying and the spherical mechanism is the reason of breakage. It is possible to correct it as follows – to block water, to turn off the screw of the rotary lever and the lever, to turn off a threaded part of the device, to remove a dome and a plastic element. After that to smooth out the place near sealant.
Experts recommend to examine laying and a sphere at once. And if they are damaged, also to replace them. It will help how to repair the crane which leaks, not to allow new breakage. By the way, the lubricant defect needs to be eliminated too. For this purpose examine the crane and if inside the first signs of rust were found, it is necessary to smooth out these places and to add oil material which can also be bought in hardware store. Lubricant by means of a cotton pad or a piece of a gauze is applied.
"