What iron with the steam generator it is better to buy?

Knowledge Base Hits: 192

At the enterprises of clothing industry many years production steam generators are used, similar household appliances appeared now. However recently irons with the steam generator for the house actively gain popularity.

Differences of the iron with the built-in steam generator from other devices

Before determining parameters of that what iron with the steam generator is better, at first it is important to give accurate definition to this household appliance. Many people mistakenly believe that the steam generator is the same iron in which the power of supply of steam is increased. Such concept is quite misleading.

The principle of operation of the iron is based on force of mechanical pressure, steam at the same time plays only an additional supporting role – moistening of fabric and at the expense of it ironing process simplification. In a steam generator design function of supply of steam other also acts it on an equal basis with a hot surface of a sole, and sometimes and in general independently.

The steam generator influences fabric a stream of hot steam which moves under high pressure. At the same time steam, passing the heated iron sole, it is very quickly drained and does not leave on clothes damp marks and condensate in a container for water.

Besides convenience and fast smoothing even of the fabrics which are difficult giving in to ironing, most warmed steam perfectly disinfects things, killing pathogenic microorganisms. It serves as one more factor in its advantage at the answer to a question that the otparivatel or the iron with the steam generator is better.

How to choose the steam generator with the iron for the house?

Steam generators are subdivided into three groups:

Professional - are used in sewing and textile production, dry-cleaners and laundries, have the big sizes, the tank, power and function of constant supply of steam under pressure.
Household – lungs (most often plastic) devices with ability of short-term powerful emission of steam, they it is much better than the ordinary iron, but demand careful leaving because of weak wear resistance.
Semi-professional – on functions are as close as possible to the professional steam generator, but more compact size. Are made from strong materials – stainless steel, a stopper on the handle. Undoubted advantage of such devices is function of constant supply of steam under high pressure.

Semi-professional irons steam generators, thanks to optimum characteristics, concern the most favorable to the house and small workshops.

What to pay attention upon purchase to?

Answering a question what iron with the steam generator it is better to buy, it is necessary to characterize the main characteristics of the device:

Container volume for water and boiler volume. In household appliances of capacity for water removable, they are necessary for water supply in the boiler. The sizes of professional and semi-professional steam generators allow to have the built-in tank with direct water supply in the boiler. Than the tank is more, especially the long time occurs constant supply of steam.
Steam blow – the function inherent in household appliances. At the small volume of the boiler (0.5-0.8 l) the steam generator cannot constantly give the high pressure of steam therefore when pressing the button at first there is a powerful emission of steam up to 6 bars, and then pressure falls down up to 1.5 bars and below.
Constant operating pressure of steam is an advantage of professional and semi-professional models. Thanks to the large volume of the boiler, the device can support vapor pressure a long time. At parameters about 2.5 bars the steam generator is capable to work long enough for processing of large volume of ironing.
Material of the case and sole of the iron. Cases of qualitative models are made from stainless steel with an enamel covering or copper alloy. A sole - from stainless steel and ceramics.

By estimates of experts the five of the best models looks so: