Many car owners face repair of a pendant, and the market of spare parts can offer them various options, both at cost, and on quality. But not to spend money for spare parts of poor quality and reliability, let's understand what shock-absorbers it is better gas or oil.
Difference of gas shock-absorbers from oil
The first that it would be desirable to mention, is the main differences of one type of shock-absorbers from another. Oil type of the spare part are familiar to many motorists, they are used not one decade. In this type of shock-absorbers the main making element is oil which flowing from one camera in another, begins to extinguish fluctuations. Gas models appeared in the market relatively recently, the gas which is in their design under pressure creates rigidity, at the same time it is important to note that it will not change at the movement of a rod.
To solve, to choose the gas or oil shock-absorber, let's talk about their main advantages. Today gas models have one undoubted advantage in comparison with oil, gas does not change the properties at temperature change of the environment. And it means that similar models can be used even in the region of the Far North, without being afraid of the fact that shock-absorbers will work worse or will not be able to provide rigidity at considerable fall of temperature of air at all. Oil models cannot brag of such quality, but their cost will be slightly lower. Thus, the choice of gas or oil shock-absorbers in many respects depends on in what region you live, both how strongly and often air temperature goes down there.
The style of your driving will be one more factor influencing the choice of model of this spare part. If the driver loves high-speed driving, then the greatest rigidity during the movement to him will provide gas models, in what shock-absorbers are softer gas or oil, it will is not necessary to doubt, of course, softer the models using oil. Certainly, it is impossible to tell that models which function due to overflowing of oil liquid on cameras are not suitable for high-speed driving, it absolutely not so, but will be much more comfortable nevertheless to drive the car with gas shock-absorbers.
One more factor influencing what gas or oil shock-absorbers to buy will be as far as you are ready to pay big money for the increased term of operation of a detail. It was already mentioned above that spare parts at the heart of which the principles of work of gas are underlain are slightly more expensive of, but, there it is not told about the fact that such models serve much longer. If you are ready to pay big money for an opportunity to make planned replacements of shock-absorbers less often, then it is worth choosing gas models. When money it is more important for you, buy oil spare parts.
The last council from experts is suitable for a situation of the choice of any spare part, all mechanics claim that in the technical instruction to the car will be always written what models it is better to get therefore be guided also by it too. Cars in which spare parts are replaced with the same, that is almost native models serve much longer, and it is safer to go by them if you lost the instruction, then the experienced mechanic will prompt to you what types of shock-absorbers can be used for any given make of the car.
Summing up the short result, it is possible to draw the following conclusions: first, be guided by service conditions of the car and style of the driving, secondly, gas models stand more, but also serve longer.