It is difficult to present work of office without such device as the printer. You do not think of its work and just you use it for designated purpose. Sometimes harmonious process stops and it is necessary to understand why it does not print the printer. There are also other questions from this series, for example, why the printer does not print though there is a paint. The pleasant moment is that having solved a problem once, it is possible to eliminate quickly it in the future.
Why does not print the printer from the computer?
The printer is the device without which it is heavy to do in the modern world. Thanks to it we can bring information to paper. For this purpose it is only necessary to connect it to the computer and to make installation of the program. There are cases when the printer ceased to print, so, the most common causes are:
- Often it is forgotten to be included in network. Sometimes the wire is killed during repair or other works. Also begin a solution with check of it. When the printer turns on, it reacts characteristic hum.
- The printer for the press is incorrectly chosen. In Windows 7 and 8 OS happens that not that printer is chosen and the person sends the document to the press not there. Especially it is relevant at big offices with several printers.
- At failure in Windows the document on the press hangs. Often it happens when different users send documents and they crowd in the printer buffer. Happens that there gets and the damaged file and all turn is stopped. To correct it, it is necessary to clean all turn and to send the file for the press again.
- Paper is absent or hesitated. If the leaf got stuck, it is necessary to take accurately it, without having torn and to continue the press. It is recommended to use quality paper that such problems did not arise.
- Problems with drivers. Reinstallation of Windows or separate programs can influence software operating operation of the printer. Come in the dispatcher and tasks and look whether is not present at an icon of the printer of exclamation marks. If is, then the driver needs to be reinstalled and then the printer will begin to print again.
Why the printer prints with strips?
If there was such problem, then it is necessary to look at a type of the device. If the printer is printed strips and by it jet type, then there can be following reasons and solutions:
- Low level of paint. For this purpose start check and look at information or assess a situation visually. It is necessary to replace the cartridge or to perezapravit it. Paint became a little and that is why the printer prints strips.
- Problem of the printing head. For this purpose choose its cleaning in the menu, or wash out, observing the instruction. There is a special liquid which is intended for strong pollution. In addition, the problem can be in a raster tape in which there was a contamination.
If the laser printer, then it is necessary to look whether gas station of a toner is normal, whether the cartridge is damaged and whether the edge is correctly established. It is possible to determine a problem and by the nature of strips. If they have an appearance of impregnations, then perhaps the cartridge is filled incorrectly. If strips appear in the same place, then check whether the foreign subject got to a toner. It is often possible to notice that strips arise at the edges of a leaf. In this case it is necessary to replace a photodrum.
Why the printer prints crookedly?
There are moments when at the printout of the document the image is rejected, then it is necessary to establish the reason for which the printer prints crookedly. More often it consists in calibration violation.
- In that case it is necessary to make it, synchronizing the printing head or using color profiles. If after these manipulations the problem was not resolved, it is necessary to check a tape of an endoker. It can be polluted.
- It is necessary to clean it with care, without having damaged integrity.
- Pollution can have also rollers which submit sheets in the shifted state. Well and the wrong apportion of paper can be the most banal cause. Whether check exactly it put in a tray and make the press again.
Why the printer prints faintly at the full cartridge?
Every time when we print out the document, we want it to have the accurate and bright drawing therefore we watch paint and in time we try to fill the cartridge. It is necessary to understand why the printer prints faintly. It can mean that it is necessary to check settings and to exclude the Economical Press function.
It is possible to try to replace a magnetic shaft or to clean an edge. Sometimes you think that everything is already corrected, but the leaf has no bright image. In that case it is necessary to study paint, its expiration date and quality. It can be the cause why the printer does not print brightly. Try to replace a type of paint.
Why the printer prints black sheets?
During the press we expect emergence of black symbols or the image on light paper. The moments when, sending white paper to a tray, we receive black meet. It is worth understanding the reasons on which the printer prints black leaves. It can be a flare of a photodrum to which information from the device is transferred. In that case it is necessary either to get new, or to wait for restoration.
As well as in other situations, the problem can disappear in pollution of contacts. Besides regular cleaning, it is necessary to select paper correctly. Not for nothing on packing note "for the fax", "for the printer" and so on. It is necessary to select also qualitative components of the printer. Especially it concerns the cartridge on which precisely you should not save. Well also you should not exclude the cause of breakage of the device.
Why the printer prints green instead of black?
Expecting the image of one color, we can sometimes receive another, for example, the printer prints green though black paint is filled. It happens if there was a contamination of the cartridge or as a result of hit of air to the ink canal. It is necessary to pump out excess air, using the syringe. It is possible to explain this situation with a spillover of ink therefore it is worth filling paint, observing necessary volume.
Why the printer slowly prints?
The device can disappoint the owner if the feed rate of the document goes not as it is necessary. It is worth understanding the reasons for which the printer slowly prints. Pay attention to quality of the cartridge. It is the best of all to select original, suitable for the concrete device. If you notice that speed falls at connection of the printer to the computer, then it is necessary to look at a cable or the router. Check settings of the computer:
- If the best press is established, then it will be made more slowly.
- If "The silent mode" is included, then speed will be reduced.
- In that case it is possible to reset all settings or to reinstall the driver completely having removed real.
Why the printer prints through a line?
The possible problems connected with the printer are diverse. There are situations when the printer prints through a line. In the majority of situations it is necessary to replace the cartridge. There can be its pollution or failure. Besides, it is possible to try to clean the printing head. If did not help, then reboot the device and start the press again. If the problem did not manage to be solved, then, most likely, there was a breakage of the printer and it is necessary to address the expert who will repair the device or at least will precisely define why does not print the printer.
"