With approach of winter in the midland of Russia the skiing annually rises by top of the popularity. To derive the maximum pleasure from fast descent from the mountain or the cross-country in the forest, it is important not correct to pick up skis, but also to prepare them properly. For this purpose in skiing it is accepted to use special lubricants
Instruction
1. First of all, each beginner has to know that the surface of the ski is divided into two sites: sticky (occupies about 40 cm in the middle of the ski) and slippery (all rest). Therefore they are greased differently. Apply paraffin for good sliding on the nasal and calcaneal part of the ski, and process the sticky site kick wax.
2. Now we will talk about how that's right!to greaseski . For putting paraffin we will need the iron installed on small temperature. We stack skis the sliding surface up and we iron the iron the end of the ski. Now we rub the surface with paraffin and again we iron the end of the ski the iron. At the correct temperature of heating paraffin will melt slowly and evenly. If you felt the smoke smell – reduce the level of heating of the iron.
3. We make the similar procedure on all slippery surfaces of skis and we leave them approximately on half of hour then plastic (not metal!) we delete with the scraper surplus of paraffin and the soft tissue we give the surface a high polish.
4. Putting ointment – process much less labor-consuming. It is only enough to pound of it how many layer on the sticky part of the ski.