In modern household appliances, and both for high technologies, and for simple devices, use Li-ion batteries which are allocated with simplicity and low cost of production. Besides it should be noted good operational characteristics. It is important to understand as it is correct to load li-ion accumulators, as if it is wrong to do it, then the device will not hold long time a charge and soon will simply fail. There are several rules which by all means should be considered that phone or other device the bigger amount of time worked.
How to load li-ion the accumulator?
Often modern equipment has the device which does not allow transition of a charge to critical marks. If in the gadget there is a Li-ion battery, then it should be put on charging when rates of the battery are 10-20%. In that case the quantity of full cycles of charging increases from 600 times till 1700. One more important point – when it will be specified that the charge reached 100% of value, you should not disconnect the device from network still a couple of hours. Saying about how to load new li-ion phone accumulator, It is necessary to tell that for increase in term of use of the technical device, it is recommended to alternate full and incomplete charge. If for charging the USB port is used, then process has to last more.
Rules how to load li-ion the accumulator:
- Every three months is recommended to carry out a full discharge of the gadget. Similar prevention will allow to prevent knocking down of a mark of the maximum and minimum charge. The full discharge leads to the fact that the minimum value of a charge is nullified, and then, it is necessary to do exercises during 8-12 h, it will allow to nullify also the maximum value. Thanks to such manipulations the accumulator will begin to work better.
- If the battery any time is not used, then it is better to store it with a small amount of a charge of 30-50%. It is the best of all if at the same time temperature is about 15 degrees. Thanks to it the battery will be stored, without worsening the opportunities. If the battery is completely charged, then the most part of capacity can be spent. The rarefied accumulator after storage will only need to be thrown out.
- Saying about how to charge the li-ion battery, it is worth replacing that it is important to use only the original device as the external adapter plays a role of the rectifier and voltage stabilizer. If it is absent, then the battery should be got and charged, using the external device.
- For Li-ion batteries the increased temperatures are pernicious. For this reason the device is recommended to be stored far away from direct sunshine and various sources of heat. Admissible temperature range is from-40 to +50 degrees.
Many for charging are used today by the so-called frogs who are let out by the Chinese producers. It is possible to find messages that such devices simply lit up in operating time. For this reason before using such universal charging, it is important to carry out verification of permissible values which are specified on packing. Pay special attention to the maximum capacity by which judge whether charging will be carried out or not.
With what current to load li-ion the accumulator?
In the majority devices rated voltage on an element is 3.6 V therefore the recommended current of a charge has to is 0.7 C, and current of the category is no more than 0.1 Pages. In case the battery works at voltage less than 2.9 V, then current has to be 0.1 C.