Many PC users aspire in all possible ways to improve operation of the computer. For this reason information on whether it is possible to accelerate the processor on the laptop, is relevant. People who work with heavy applications face a similar question or often play modern games. Thanks to dispersal of the processor it is possible to count on the improved operation of the personal computer.
How to accelerate the processor Intel?
For this purpose in the basic different programs which are in broad access on the Internet are used. There are many options, we will stop for idle time in use of the utility – SetFSB. It is possible to apply this program both in old, and in new models of the processor. It is important that it was supported by the motherboard therefore surely check this condition on the program website.
How to accelerate the processor on the laptop by means of SetFSB:
- It is necessary to choose model of the claquer who is established on a materinka from a drop-down list of Clock Generator.
- Choose the Get FSB button that will open a program window where the having frequency of the system tire and processor will be displayed on a desktop.
- Now we pass directly to dispersal of the processor for what it is necessary to move small steps the slider to the center of a window. After each change it is worth controlling processor temperature. It is the for this purpose best of all to use in addition the special program, for example, of Core Temp.
- After optimum values are found, it is necessary to choose the Set FSB button.
It is important to notice that the specified settings will work only until it is rebooted and everything it is necessary to establish at first. If for the user it is an essential shortcoming, then it is possible the program to place in automatic loading.
How to accelerate the AMD processor?
Processors of this producer possess a good technological stock that gives the chance to increase performance. It is possible to carry out dispersal of the processor by means of programs, for example, of AMD OverDrive or PowerTweak2. We suggest to stop on other more popular option – use BIOS. That to get to it, it is necessary to press during loading of the laptop the Delete keys before OS is loaded.
As it is correct to accelerate the processor by means of BOIS:
- Having been included in the menu of the program it is necessary to come into the section Advanced where enter the subsection JumperFree Configuration. Exactly changes will be made here.
- Look at Al Tuning value where it is necessary to change parameters and to establish – Manual. It will allow to continue control in the manual mode.
- We pass to the CPU Frequency point which determines frequency by the system of the tire. Here change important on 20 MHz.
- After that it is necessary to change the operating frequency of the first and second slot. For this purpose in the PCIEX16_1 Clock and PCIEX16_2 Clock points establish value of frequency on 160 MHz.
- It is still recommended to change kernel supply voltage for what establish CPU Voltage value on 1.5000 v.
- The last changes are made to point - CPU Multiplier which is responsible for a ratio of frequency of work of process to the frequency of the system tire. The last value needs to be established at 14:5Õ.
It was necessary only to keep changes and to reboot.
How to disperse a processor cooler?
The cooler is an important part of the computer as it prevents overheating of the equipment and damage of its important details. In case fans do not cope with the task, it is possible to adjust their work. To disperse a cooler, different programs are used, the most popular is the AMD OverDrive program which can be downloaded on the website of firm. After start of the program there will be a scanning of the equipment. Then it is necessary to choose the Fan Control menu. In the appeared window, change position of runners which are in the lower part. After that press the Apply button that will allow to fix changes. Then select the Preferences item and pass into the Settings menu. There give a mark opposite to the Apply my last settings when system boots point, and then, confirm the choice, having pressed OK.