Many users of the computer at least once had problems with a sound. For example, it could for the unclear reasons be gone, begin to be distorted, etc. Before calling the master, it is possible to try to correct a problem independently, besides the malfunction reasons in most cases trifling.
The sound on the personal computer can disappear for various reasons which can be divided into two groups: hardware and program. The malfunctions connected with malfunction of the sound card or loudspeakers concern the first. As for the program reasons, there is a lot of them.
How to adjust a sound on the computer with new columns?
For a start it is necessary to check loudness level in a system for what it is necessary to press the Loudspeakers badge which is near hours in the taskbar. The window where it is necessary to adjust loudness level by means of the toddler will appear. One more option, for control of a sound – special Mixer where it is possible to establish sound level for different programs.
If badge for regulation of a sound it was not succeeded to find, so Windows did not find the connected loudspeakers. Let's understand how to adjust a sound on the computer through columns. Open Control panel and in the top part of a window choose Small badges and the Sound point. As a result the new window where it will be possible to see uninvolved loudspeakers in a system will appear. The following step – double click open properties of loudspeakers and there it is necessary to activate the Use It Devices point. Surely save all settings and check a sound.
If automatically it is impossible to adjust a sound on the computer, then, perhaps, a problem quite banal – breakage of cords or you just connected wires not to that entrance. Check that columns were inserted into an exit of green color. One more widespread problem – entrances strongly wore out. In that case it is necessary to get wires, to correct everything and to place them into place. If columns are included, so the green bulb which is in front or behind will light up.
How it is correct to adjust a sound on the computer after the Windows installation?
In case the sound was gone after reinstallation of the operating system, then it is necessary to check whether the driver is installed. For this purpose open Control panel and select the Device manager item there. Look and if in the appeared tab opposite to a line The sound devices are the exclamation mark, so it is necessary to update drivers for what press the corresponding button.
In a system the service Windows Audio which is responsible for a sound can be also disconnected. In that case it is worth knowing, where to adjust a sound on the computer and to activate a system. It is necessary to open Control panel and to activate the Administration point. – pass the following step into a window of Service where find Windows Audio and look that in a line State was it is specified that the system works. In case it is disconnected, activate the Restart badge, and then, reboot.
How to adjust a sound in earphones on the computer?
For a start it is necessary to connect earphones, for this purpose insert plugs into sockets of the corresponding color. In the Start-up menu choose the Control panel tab and pass into the Zvuk-Vosproizvedeniye parameters. There it is necessary to pay attention to the sections Properties and Adjust. If everything is adjusted correctly, so opposite to the inscription Earphones there has to be a green tick. One more reason – there are no drivers. Sometimes the problem is in banal breakage of earphones and they need just to be replaced therefore check whether there will be a sound in other earphones.