How to make a phosphor

How to make a phosphor

Knowledge Base Hits: 76

Do you want to make the shining inscription? Or the shining details of any device? For this purpose you need to make a phosphor at first. It will require special chemicals. It is necessary to work with them accurately, some of them are poisonous.

It is required to you

Instruction

1. Receiving different paints requires a different set of chemicals. It is possible to get them in the specialized shops trading in chemical reactants. For obtaining bluish-white color you need thiosulphuric and sour strontium in number of 20 g, 0, 5% spirtovy solution of nitrate silver — 2 ml, 0, 5% solution of nitrate lead. - 4 ml. For obtaining yellowish-green color take: sernovatistokisly barium — 60 g0, 5% of spirit solution of nitrate uranium — 6 ml: 0, 5% solution of nitrate bismuth — 12 ml. Are necessary for obtaining light yellow color: carbonic strontium — 100 g; sulfur — 30 gsod (carbonic sodium) — 2 g; chloride sodium — 0, 5 g; sulfate manganese — 0, 2 g. For receiving a violet phosphor: 0, 5% of nitrate bismuth — 1 mlser — 6 g; chloride sodium — 0, 15 g; extinguished lime — the 20th gkhloristy potassium — 0, 14 g.

2. Pound components of mix in a porcelain cup then in the same cup put it to heat up for 2-3 hours on the gas burner or an electric tile. At the end of heating carefully mix.

3. Shift a phosphor in a glass or porcelain jar. It is possible to store it in the place protected from light long enough. It is desirable to close densely to bank a cover that not dopusti access of air, dust and moisture.

4. Apply the received phosphor on any material with a dusting method. At first apply a layer of glue or varnish on the painted site. Without waiting for drying, fill phosphor powder on this site. Remove excess of powder with a soft brush. It is a phosphor with afterglow — it "is loaded" from a daylight then glows in the dark. Besides, such phosphor can be loaded from an ultra-violet lamp.

Author: «MirrorInfo» Dream Team

Print