For comfortable pastime in the fresh air it is necessary to have an arbor in the homestead territory. Significantly to save money, everything it is possible to make with own hands, information on how just to construct an arbor for this purpose is useful. There are many different options, but most often do a design, using a tree which is easy for processing.
How to make a simple arbor with own hands?
At first it is necessary to pick up the right place and to level a suitable ground. One more important point – soil has to be dry that is important for stability of a design. It is recommended to make the drawing, having specified the sizes. For work it is necessary to prepare material previously: boards, slate, solution of concrete and self-tapping screws.
As the hands to construct a simple arbor:
- As as the main material the tree is chosen, it should be taken into account that it demands protection against moisture and ventilation, otherwise the arbor not for long will serve. For this reason it is the best of all to use the option meaning a design raising over ground level.
- It is the best of all to use the column base. For it make in corners of a design of deepening and pour out in them columns of concrete.
- Prepare boards, considering length and width of an arbor. For the basis lay out four boards that the rectangle suitable under support was formed.
- Finding out how quickly to construct an arbor, it is worth passing to an important stage – production of sides. The face parties of a framework will have the pentagonal form with the equal parties. For side racks use two boards, and for a roof on one. At first bring down a roof corner, and then, from each party beat two boards. Strengthen top of a framework additional bar. When two face frameworks are ready, establish them on base boards, having fixed from two parties.
- To fix a design, it is necessary to execute a coupler boards on all length of an arbor. At first fasten the lower and top parts of a framework, and then, carry out additional tightening of a floor and roof. After that it is possible to pass to tamping of boards, for formation of a floor.
- In an internal part of an arbor in each corner establish corners which will play a support role for future benches. Consider that boards have to form a right angle. As a result four flat chairs will turn out. On three parties fill boards for sitting and a back.
- Saying about how to construct a simple arbor, it is necessary to investigate also formation of a roof. Leaves of slate should be laid on the prepared support with an overlap. Fix them on beams by self-tapping screws. It will be necessary only to grease an arbor with the protectant and to paint if desired.