This article does not pursue the aim to wise up someone to get into others houses on purpose something to profit, but sometimes the ability to open the lock without key a paper clip can be useful. As to learn it, it will be told in this article.
How to open a paper clip the padlock without key?
In this case two paper clips, one of which will play a master key role, and another – a natyazhitel will be necessary. At one of them it is necessary to unbend the big end twice and to make a small bend in the form of letter "G" though it and is optional. For production of a natyazhitel it is necessary to unbend the second paper clip that the straight line with a bend on the end turned out. Length of a bend has to be 1 cm, and to the main line it has to lie at an angle 90 degrees. Now it is necessary to insert into the line of a section of the padlock a natyazhitel. Here the main thing is to remember in what party it is necessary to turn it by analogy with a key.
Anyway, having tried to turn in one, in other party, it is easy to understand what of them correct: resistance in this case will be a little smaller. Having clamped a natyazhitel in the left hand, came it is time to insert a master key of right. Without reducing pressure on a natyazhitel, it is necessary "to comb" a keyhole. It means that the master key needs to be inserted against the stop and to begin to extend quickly it upward. It is not necessary to pull, but, having enough trained, it is possible to achieve smoothness of movements.
Being interested as it is possible to open the lock a paper clip, it is necessary to put each available pin in the lock into place. That is the left hand it is necessary to rotate a natyazhitel, applying force, and right to press pins. When the lock gives in and the pin will reach the necessary situation, the easy click will sound. Wishing to know how it is possible to open the lock by means of a paper clip, it is necessary to shake each pin here and there, using more and more efforts, being active a natyazhitel.
How it is possible to open the door lock a paper clip?
If it is required to open a door, the same paper clip having an appearance of letter "G" is required. For the best effect on this bent end it is possible to knock slightly with the hammer to make it more flat. Besides, also the bent metal plate is required. Further actions are as follows:
- asking a question as it is possible to open the door lock without key a paper clip, it is necessary to insert the plate having the-shaped form into the top part of a keyhole and it is good to record it;
- confident movement to press it inside as though instead of it the key is used;
- further the paper clip which needs to grope a pin is inside inserted. It also should be pressed inside that the plate turned a little;
- as well as in a case with the padlock this manipulation should be repeated for each subsequent pin and at last to open the lock.
To open an interroom door with the lock which is built in the handle even more simply: it is enough to insert the paper clip bent in the above way into a cut, to press on a clamping plate, at the same time turning the handle. Everything, the door is open!
sometimes be useful in case jammed lock "uvula". In this case the paper clip needs to give the form of a usual wire, and for usability to bend in the form of a semicircle. To push adaptation to the door well that both ends outside stuck out. To grasp them, at the same time quite strongly to press a paper clip, having pulled it on itself or from itself, it already as will turn out. The main thing – that the uvula jumped on the place and the door opened.
It is absolutely simple to open the window lock falling to a ready groove by the principle of a barrier. It is enough to push only to the well the leveled paper clip and to lift the lowered lever.
"