As it is pleasant to have a rest at own dacha in the good company! The small river, kosterok, cold beer in the shadow of trees … And if to add smoked small fish of own preparation for these pleasures of life – the pleasure will be full. So without smoking shed not to do, the benefit, it is possible to make it with own hands and without special expenses.
It is required to you
- - bricks;
- - iron barrel or box;
- - grid;
- - sheet of steel.
Instruction
1. For a start decide where there will be smoking shed. On the one hand, it has to be located in the convenient location that was where to put fish and where to sit, expecting completion of process, to toss glass - another of beer. With another – you should not establish this flammable subject near wooden buildings in order to avoid troubles from raged through an oversight of fire. Do not forget to provide also enough place for flue. Make it underground, up to 3 m long, about 35-50 wide, height – about 25-27 cm.
2. Now it is necessary to prepare all materials that everything was near at hand. It is better to do the smoking shed of natural materials as synthetic when heating will emit hazardous substances. That is if have decided to build the brick smoking camera, then let it will be normal clay, etc. By the way, it is possible to adapt normal iron barrel or metal box for the camera. The main thing – that the area was no more than 1 sq.m, and height – is no more than one and a half meters.
3. Now it is possible to begin works. First of all dig out flue. Its channel has to be located above, than the smoking shed. Lay out flue walls brick, fastening it with clay mortar and stacking on edge. From above cover with metal sheet. Keep in mind that the flue will enter the smoking camera approximately 20 cm that smoke could come to light in time.
4. The next stage – creation of the smoking camera. As it has been already told, you can lay out it brick or adapt for it metal barrel, iron box. Only in this case surely remove bottom. You will directly kindle fire on the earth, under the smoking shed. From above create compartment for smoking, having put grid or normal iron rods where there will be products on sides. Do not forget to put to flue valve from steel to block exit of heat and smoke. The leaf about 4 mm thick will be suitable for it.