After repair in the apartment the old convenient polished cabinet has ceased to fit into your updated interior. You do not hurry to leave strong furniture, having brought it to the dacha or having thrown out on garbage can. Update cabinet the hands. All necessary goods for decorative works can be bought in large hardware store.
It is required to you
- - the polished cabinet;
- - self-adhesive film;
- - tape measure;
- - scissors;
- - flower spray;
- - felt palette or soft rag.
Instruction
1. Use self-adhesive film for decorative finishing of cabinet. This way "cleanest". You will not need labor-intensive process on removal of old covering. The film will perfectly lay down on the smooth polished tree.
2. Take the measurements of cabinet surfaces which you will update. Get self-bonding of suitable coloring and the invoice. Pay attention to film width to avoid excess joints at visible surfaces.
3. Unscrew from doors of cabinet of the handle and locks. Remove decorative pads if they are.
4. Attentively examine polished surface. If on it there are deep and wide scratches, chips, close up them putty for woodworks. Previously to oshkurta also ground these places. After putty drying once again grind roughnesses.
5. Postpone the necessary sizes on the ruled reverse side of self-bonding. You can update all surface of cabinet, only doors or to make imitation of decorative inserts of film. For this purpose it will be interesting to look film with the drawing under weaving or skin.
6. Gather water in the flower spray and add a little means there for washing of ware or liquid soap that slightly soap solution has turned out.
7. Sprinkle a little soapsuds on that surface of the polished cabinet where you will stick self-adhesive film.
8. Separate self-bonding from the basis from one edge on 5–10 cm. Unbend paper, and apply the sticky party of film to the humidified cabinet surface. Pick up the felt palette or soft rag. Carefully smoothing from the middle to edges, expel from under film of water droplet and air.
9. If the fold was formed, at once level it, having separated the closest edge of film. Puncture accidentally turned out air bubble with needle, then press this place rag.
10. Pick up new handles and decorative pads for cabinet. It is possible to frame doors with wooden platbands or polyurethane moldings or fillets.