Foam concrete blocks material rather warm because of availability in their structure of air bubbles which are formed in the course of production with addition of foaming agent. But as is well-known in order that the building was warm and did not become wet because of formation of condensate of the temperature condition forming when changing – it needs to be warmed in addition. There are several ways.
Instruction
1. It is possible foam concrete blocks of which load bearing walls are made, to warm by means of facing of the building foam concrete blocks of lower density which are produced especially for warming with even high content of bubbles.
2. To warm by means of foam concrete blocks, it is necessary to provide wider base allowing to put up additional walls at construction.
3. Facing of the building facing brick is not warming measure but only finishing option.
4. Before any kind of finishing it is necessary to fit external walls from foam concrete blocks any modern heat-insulating material which are presented at the construction market in wide assortment and to finish at discretion.
5. In the building it is possible to make covering of walls paroizolyatsionny material. It will in addition warm them and will allow to protect from formation of condensate.
6. If to make good warming of external walls, then to usually make need additional internal warming completely are absent. As warming by means of modern materials completely protects the building from temperature drops and to emergence of moisture because of the formed condensate.
7. Do not forget that it is absolutely inexpedient to warm only walls. That the building really warm it was necessary to warm the basement, floor from outer end and ceiling. On ceiling at first the vapor barrier layer, on it – thermal insulation and again vapor barrier creeps. Floor from the basement is fitted in the same way as ceiling.
8. Having warmed the building completely, you will significantly save on heating.