There is a set of ways of setting of a tie. Not all apply them, certainly. If the man is able to use several options of setting of a tie, it is already excellent. There are several recommendations of rather correct setting of a tie:
- to knot on a collar, but not in hands.
- As a result of setting of a tie the wide end should not turn out neither long, nor short. Its optimum length two centimeters below a belt are considered. In order that to make it it is necessary to stretch a tie under a collar so that its narrow end reached a half of length of wide.
Easy way of setting of a tie
This way won the popularity at men because its setting does not require special skills and also a lot of time is saved.
When setting the thin knot having the cone form is in such a way formed. Very important the fact that in such option there is no symmetry what allows to make knot easy and accurate, not reminding triangular shape. The main advantage of simple knot is its application on any tie, and neither its length, nor material matters.
Classical way of setting of a tie
Such way of setting is divided into several stages:
- The tie needs to be wound with one round around a neck clockwise. At the same time its narrow end has to lay down on a breast, and wide from above on it, after a turn around a neck.
- The wide end needs to be palmed off under narrow.
- The wide end of a tie needs to be wound with one round around narrow.
- The wide end of a tie is pushed in a loop under a chin, he slightly needs to be brought up up and to pass throughout knot which was formed on a breast. It must be done so that the wide end fell down to a stomach along the narrow end of a tie.
- It is accurate to tighten a tie.
Unusual ways of setting of a tie
Often men use when setting a tie different methods with traditional knots. But besides traditional ways there are also interesting options to tie a tie. At development of several options it is possible independently to learn to create the variations.
Baltus node
It needs to be tied in nine stages. Such knot is considered one of the largest and wide. It was called in honor of Baltazavr Kolossovski (Polish-French artist). That to tie it it is necessary to use a long tie as its most part will go to formation of knot. Distinctive feature of such knot its arrangement a wrong side outside is considered. As a result has to receive wide knot of triangular shape.
Christensen node
Such original way of setting of a tie represents formation of a crosswise form. It something is similar to simple knot in the equipment, but only on the termination it is possible to receive knot which has ideally flat parties. Such method can be used on a tie of any length.
Onassis node
Technology of setting of such tie is that it is just thrown through knot, but do not pass through it. The tie with such knot is worn differently: the clip thrown through knot, fixed behind, with the wide end.
Cavendish node
Creation of such knot requires eight stages. As a result such knot will turn out asymmetric and two-center, it practically differs in nothing from an easy way of setting and for it it is possible to use a tie of any width and length.
It is quite simple to learn to technicians of setting of a tie. If to try to tie several times a tie any of above-mentioned ways will manage to make the appearance original and extravagant.
We offer some more interesting ways of setting of ties below.
"