Viewing system status in Cisco is made by means of the commands entered into the console. It belongs also to those cases when you need to learn a status of loading of the computer for a certain moment.
It is required to you
- - computer;
- - keyboard.
Instruction
1. To learn load in Cisco or to provide system management functions, use input of the commands which are specially intended for these purposes. If you want to browse, random access memory of the computer is how loaded into Cisco, use the “Router#show proc mem command", entered, naturally, without quotes. You will display statistics in which there will be a division of random access memory into two parts: a part of "Free" will show you free available resources, and a part of "Used" – the part of random access memory occupied with certain programs. Below more detailed information concerning use of this resource will be provided.
2. If you need to browse loading of the processor in Cisco, act by analogy with definition of loading of random access memory. Enter the “Router#show proc cpu sort command" then at you the table showing load of this resource of your computer will also be displayed.
3. Use other commands in Cisco for performing any given actions. For example, "write erase Reload" returns settings of the router to those which it had upon purchase, “Router#show version" carries out information display about the version of a firmware of the equipment used by you, "sh run" shows what configuration at your device, at the same time viewing information is carried out by the key press of a space. The Debug command transfers you to a debug mode of a system, "conf t" - in the configuration mode.
4. Study highlights of work with Cisco which are based on the commands entered into the console. After you master them, you can be guided quickly enough in IOS. There is a lot of commands, but to you will be to learn only the main enough then at you a certain image about work of this system should be created.