Now the foam mortar is often used at construction of houses. The fact is that this construction material has acceptable cost. Such concrete can be warmed easily.
Instruction
1. For a start be engaged in digging of ditch. For this purpose lease the high-performance excavator. You can execute other land works which are connected with completion of ditch manually. Sand is considered the best subfoundation. At the bottom of ditch make equal cement and sand tie. Its thickness has to be not less than 5 centimeters.
2. Then over tie lay two layers of rolled hydrostekloizol. By means of blowpipe weld cloths of waterproofing carpet. At the edges surely make release which length has to be more than 1 meter. It is necessary in order that then it was possible to tuck isolation outside on concrete wall of the base. On layer of hydrostekloizol connect basis framework. Use bar armature for this purpose.
3. Start concrete work. At the edges of prefabricated reinforcement cage establish temporary timber formwork and fill in in it concrete. Make its surface plain. Surely execute consolidation. It becomes by means of the vibrator. Leave this design not several days until it gets stronger.
4. Start construction of overlappings. After walls of the base are brought to design mark, establish horizontal collapsible timbering. It is necessary for casting of overlapping of half of the first floor. Its regulation is carried out by means of racks. Extremely it is not recommended to knit armature in places of apertures.
5. Surely protect overlappings before casting. For this purpose use boards. After walls are put up on height of the first floor, be engaged in casting of interfloor overlapping.
6. Further you pass to walls. Best of all you put up walls and at once stack heater. It has to be located in wall body. It is the best of all to use the heaters made of sheet expanded polystyrene. Conduct external and internal laying at the same time. Make more attractive facade. Use brick facing.