Due to the continuous increase in the cost of tariffs for housing and communal services, recently issues of installation of metering devices of gas, cold and hot water become everything the most relevant. The counter of cold water allows to reduce accounts of payment of water significantly. This visible economy easily is explained by the fact that usually when calculating consumption of cold water the total amount of the account is evenly distributed between all inhabitants of multifamily house. Therefore you pay not only the consumed volumes, but, often, also neighbour's. In this regard for inhabitants of multifamily houses the installation of the flow-mesuring counter for control of own expenses of cold water is recommended.
It is required to you
- The counter of accounting of cold water, the wire mesh filter, back valve, metal or polypropylene plastic pipes, the soldering iron for tube joints, adapters for connection, knife for cutting of pipes.
Instruction
1. For a start it is necessary to buy the counter of accounting of cold water. Even at installation the wire mesh filter and back valve will be required. The wire mesh filter will be installed in front of the counter. The back valve is installed after the water metering device.
2. Before installation of the counter you need to decide on material of connectors and pipes. For works of this type metal or polypropylene plastic pipes are usually used. At installation of the device with distributing from polypropylene also special soldering iron will be necessary for you for tube joints.
3. When using metal plastic pipes, adapters will be necessary for you for pipe joint and special knife for cutting. It is possible to start assembly.
4. The installed counter needs to be coordinated in city water utility and to pay departure of the controller to you. After acceptance by the controller of work on installation of the counter, you need to sign the contract and to notify on it your managing organization.