When fishing on spinning the fisher has to not only whip competently fish and bring it, but also pull out catch on the coast. For raising of the cut fish from water it is intended podsak. When catching from the coast it is possible to do also without it, especially if fish is small. But when catching from the boat of large fish not to do without podsak. Using podsaky, it is possible to prevent break of lead or fishing line.
It is required to you
- Bamboo sticks, rods of juniper or hazel grove, kapron network, steel wire
Instruction
1. Podsak has to be easy, reliable and convenient in use. Do it of bamboo stalk to which attach rim and grid from kapron threads.
2. Curve rim from the steamed-out rod of juniper or hazel grove. The strong rim will turn out from the chipped bamboo curved over flame. The hoop has to have minimum dimensions of 40х25 cm, its depth has to be not less than 50 cm. The grid has the cone form with size of cell about 2.5 cm. If you used cotton thread for production of grid, impregnate it with waterproof varnish.
3. Make the handle of podsak of bamboo stick not less than 2 cm thick. Handle length when catching from the boat not less than 100 cm, when fishing from the coast – up to 200 cm. The handle made of two knees and equipped with removable grid will be convenient.
4. One more option of podsak assumes availability of the bamboo handle terminating in fork from metal tubes. Insert rods from bamboo with a diameter of 1 cm on which pull grid into fork. The third party of podsak is formed by hardly tense cord providing the rigidity capable to sustain the weight of quite large fish.
5. If you catch fish, moving along the coast, use developing telescopic podsak triangular shape. When catching large pikes the rim diameter has to be not less than 45 cm, and the grid has to be so deep that fish could be located in it approximately on two thirds of the length.
6. Sometimes when using podsak the dry nitchaty network emerges at immersion, preventing to bring the tool under fish and to get it from water. In this case it is recommended to attach piece of lead which will immediately submerge grid in water to grid bottom.