In spite of the fact that in rural zone the cart are still used for its direct designated purpose - for transportation of goods, the country cart from discharge of cartage has passed into discharge of symbols of certain way of life for a long time. In modern interior design recently methods of stylization rather widely began to be used. The model of the country cart made by the hands can become interesting element of design of your house or dacha and to give to interior the Russian color.
It is required to you
- - computer Corel Draw program;
- - printer;
- - pencils;
- - toothpicks;
- - glue;
- - microdrill;
- - drills;
- - abrasive paper;
- - sticks for shish kebab;
- - scissors;
- - file;
- - wooden rails;
- - scalpel;
- - grinder;
- - board 10 mm thick;
- - compasses.
Instruction
1. Draw in the Corel Draw program contour of wheel of the necessary size with specification. Print out the drawing.
2. Cut from board square so that its sizes were more than the sizes of future wheel on 1.5 cm from all directions. Strictly in the center of square drill the opening corresponding on diameter to wheel hub. Accurately process opening file.
3. Take the printout and accurately cut wheel hub by means of scalpel. Paste the printout on board so that openings have coincided. You watch that the middle line forming two vertical needles of wheel was strictly parallel to two parties of square. Turn in corners of paper and paste them from reverse side of board in order that they did not disturb during operating time.
4. Take pencil and grind it so that its diameter has coincided with boss diameter. Measure the necessary length and cut off pencil. Draw the circle passing through the middle of nave by means of compasses. Insert nave into board and make tags opposite to future 10 needles of wheel according to the drawing. Take nave and drill 10 openings in the planned places.
5. Process toothpicks by means of file and insert them into drilled holes of nave, previously having greased with glue. Insert nave into board and level according to the drawing. Apply on each of needles two tags - one from the inside of rim, the second - on the middle of its thickness. Take future wheel and accurately cut off all needles on extreme tag and turn on the second tag.
6. Take wooden rail and putting it to internal border of rim on the drawing, plan places of cuts. Cut rail on tags, combine preparations with the drawing and plan places of fastening of needles. Drill opening and insert into it wheel needle, previously having greased it with glue. Do similar operation with all parts of rim. Accurately glue places of joints of parts of rim.
7. Draw two templates of wheel by means of compasses. The internal circle of template has to coincide on diameter with nave, external - with diameter of wheel. Cut templates by means of scalpel and put on them from two parties wheel. By means of the grinder accurately grind off the wheel rim going beyond template. Drill opening in the middle of nave. You will a little make narrower edge of nave by means of file from two parties. Make 3 more wheels in this way.
8. Take 2 square rails and accurately grind off their ends to round state so that they could be put on wheel. Paste bar on one of cart axes and in addition fix it by means of wire. Drill in it opening and insert into it the pin. Get one more bar on the pin and drill in it additional opening.
9. Manufacture the rotary limiter of stick for shish kebab. Having inserted them at an angle into 30 degrees from the inside of the cart. Make arc-shaped level and attach it to the limiter.
10. Take the second axis, paste additional bar and drill in it opening.
11. Make pole of stick for shish kebab. Insert small piece of wire into front part of pole.
12. Make shafts. Make 4 hooks of copper wire and insert 2 into shafts, 2 more - into cart front axis.
13. Stick together the top and lower frameworks of the cart from sticks for shish kebab. Paste vertical racks to the lower framework and let's glue dry out. Paste upper part of framework. Paste interline interval strips to side parts and the bottom of the cart.
14. Collect all parts of design. Your cart is ready.