Outer door – the most vulnerable element in the apartment. It is absolutely no wonder that its surface quickly spoils, suffering from temperature drops and humidity. The bad mood of owners too not in the best way is reflected in external covering of product. Try to update door, this repair is not really complex for the person who is familiar with manual work.
It is required to you
- - joiner's glue;
- - varnish;
- - flat brush;
- - putty;
- - sheet fibreboard or plywood.
Instruction
1. Most often demand repair of door, veneered natural interline interval. The reason of their aging and damage - the increased and often changing humidity in adjacent rooms. Not too well also wiping by damp rag is reflected in surface.
2. The interline interval in this case begins to peel off from basis or framework of product. It is possible to glue the flaking part, but it will not solve problem. It is necessary to check all square at availability of emptiness by means of prostukivaniye.
3. In the found emptiness pump the syringe glue and press press. Miss the mark the flaking sites of material with brush with glue and put cargo. For equal load dispatch put press on equal veneer sheet. In 4-5 hours when glue dries, grind door surface abrasive paper of average granularity.
4. Sweep away garbage rigid flat brush and wipe door with clean napkin. Cover surface with thin layer of quick-drying liquid furniture varnish. Examine the place of repair in search of gluing together traces. If color in these parts obviously differs from the basic, tint defects, having picked up color.
5. Deep cracks need to be filled with mix of small sawdust and furniture varnish. When these places dry up, grind them abrasive paper. Cover all surface of door subjected to repair with two thin layers of furniture varnish.
6. Happens and so that door cloth too shabby for such repair. Then you need other way. Tear off the old flaking interline interval chisel and the palette. It is absolutely hard work as in some places it keeps very strong. Carefully grind the bared surface skins of different granularity.
7. By the size of the replaced cloth cut out preparation from fibreboard or hardboard, it is possible to use also thin plywood. Miss the mark the prepared door and the cut part with joiner's glue and exactly connect these parts. Put cargo that there were no slots and emptiness.
8. Sometimes plywood with the beautiful drawing of tree, with the expressed texture comes across. In this case just varnish it colourless or tinted lacquer.