Plastic panels in the bathroom allow to make repair quickly, using to it minimum of the physical efforts. Additional plus is simplicity of mounting which even the person far from construction jobs can master.
It is required to you
- - plastic panels;
- - wooden rails;
- - dyupelya and screws;
- - stapler and brackets;
- - finishing corners;
- - drill;
- - hacksaw.
Instruction
1. It is originally necessary to measure room space to define what number of panels needs to be bought. Most often they are sold, measuring by running meters, that is, the cost is calculated proceeding from width whereas length can be various what it is necessary to pay attention upon purchase to.
2. Mounting of plastic panels is carried out on the basis of the created timber frame construction. For this purpose take rails 2-2.5 cm thick and fix them horizontally at distance no more than 50 meters from each other. If the ceiling is also going to be made of plastic, then the framework will be required and here.
3. You fix rails to walls by means of dyupely and screws. When mounting surely use the construction level as rather often the surface of walls is far from ideal flatness. In this case it is necessary to level artificially walls by means of pieces of the rails enclosed to those spaces for framework where deepenings are observed.
4. When the framework is ready, it is possible to start installation of panels. For this purpose measure necessary height and cut off excess part. Insert the first panel into the corresponding finishing corner and fix in places of contact with rails by the construction stapler. With standard height of the bathroom 5-6 fastenings on each panel turn out.
5. The following panel fastens by analogy with children's puzzles, densely getting to grooves of the first panel. So proceeds until all walls are not sheathed by plastic.