The coded lock – the difficult device in which there is no keyhole. For this reason to try to apply a master key to its opening just senselessly. But how to open the coded lock if forgot the code – about it read below.
How to open the coded lock - devices for reading of codes
If you forgot a lock combination, it is possible to try to learn it by means of special devices for reading of codes. For today those there is a set – they allow to define the code of the lock automatically.
In most cases such devices are intended for reading of codes on locks of a certain type. Certainly, the prices of such equipment expensive therefore this option will suit not everyone. Besides, readers do not give a guarantee at all that you will be able to open the lock. Especially it concerns many electronic locks which are supplied with protection against reading.
How to open the mechanical coded lock?
Mechanical coded locks have the push-button or roller type-setting panel.
To open the push-button lock, it is necessary to look narrowly at buttons attentively. As a rule, the most often used buttons have characteristic attrition. It was necessary only to make effort and guess the correct sequence.
It is even easier to open roller locks, especially, if quantity of rollers – 3. For unlocking of the lock of this type it is necessary to turn rollers serially accurately. After a while it is possible to seize distinctly the opportunity when the pin finds the groove.
How to open the hinged coded lock?
If the padlock, and you do not want to spend time for selection of a combination, use the following method. Cut out a small plate from a can, round off it on diameter, the corresponding diameter of a handle of the lock, and insert against the stop into a technological crack. It is most often located between the case and a handle of the lock.
Now make a few efforts for an unblocking of an internal latch. All – the lock is open!