Many physical phenomena give in to scaling. The little fly when flying uses the same physical principles, as a huge bird. And if desired it is possible to scale even a lightning. It will become so small that will be located at you on a table.
Instruction
1. Take the old pocket piezoelectric lighter in which gas and which has no valve for refilling came to an end.
2. Unbend the metal lens of a flame. You will be able to take outside the button and a piezoelement. Keep both details.
3. Attentively consider a piezoelement. One of its conclusions represents a wire in isolation, and another - a metal cylinder. It does not give in to soldering.
4. Unbend a wire and smooth out its end. Extend it with other wire a little.
5. Densely reel up several rounds of one more wire on a cylinder.
6. Take the rigid basis from nonflammable dielectric material. Drill in it an opening of such diameter that the cylinder together with the reeled-up wire kept in it very hardly.
7. Put on the button a piezoelement - so will press it more conveniently.
8. Take an old automobile candle. Surely make sure that it was never used with ethylated gasoline. Fix it on the same basis in any way.
9. Connect one of the wires going from a piezoelement to the case of a candle, another - to its central conclusion.
10. Having made sure that laboratory installation is not in the atmosphere of combustible gases, vapors or suspensions, without touching wires, press the button. Every time when you press it, between electrodes the spark will slip.
11. Close a candle and conductors the transparent casing having such form to press the button it was possible, and it was impossible to concern current carrying parts. Remember that the casing is not tight therefore installation can all the same be used only out of the atmosphere of combustible gases, vapors or suspensions.
12. If desired, film process of a proskakivaniye of a spark. It is very difficult to remove it on a photo as it is not so simple to press the buttons of a piezoelement and the camera at the same time. If you need photos, better then to cut out screenshots from the ready video. You hold the camera at safe distance not to damage it static electricity. Pick up lighting brightness so that the spark turned out bright, but electrodes were well noticeable too.