How to reduce redness of pimple

How to reduce redness of pimple

Under the law of meanness, it happens that day when you go on date or on some celebration. You can put on the most beautiful dress, make laying and make-up on five with plus, to varnish fingers and to perfume with spirits, but, all the same, the mood will be spoiled if on face at you the red pimple flaunts. You should not hope that modern means from advertizing will help to get rid quickly of pimple if good-bye there was couple of hours. During this time it is possible to reduce redness only.

It is required to you

  • Cream from pimples;
  • salicylic zinc oxide ointment;
  • napkin or cotton pad;
  • Q-tips;
  • hydrogen peroxide;
  • alcohol;
  • cologne;
  • tea tree oil;
  • antibacterial soap;
  • proofreader of greenish shade;
  • concealer in tone of skin;

Instruction

1. Quickly to get rid of pimple, it is necessary to dry it. Therefore, for a start it is necessary to apply after all one of creams from pimples. Such cream has to contain antibacterial components. One more the cheap and checked by time means is salicylic zinc oxide ointment. Such ointment can be bought in any drugstore. Apply pointwise, on heat-spot, a little means, slightly driving in it with fingertip. Leave means for several minutes that it could be absorbed. Blot the remains with napkin or cotton pad. If near at hand you have no pimples medicine, can use hydrogen peroxide, alcohol, cologne, tea tree oil or to put soap layer (better if it is antibacterial). They can also dry skin, helping to get rid of pimple quicker. It is the most convenient to put these means by means of Q-tip.

2. To reduce redness of pimple, it is possible to resort to masking. Consider that the basis is already put, prior to camouflage works, pimples medicine has been applied. If you have not enough time, then masking – it is the only thing to do. For a start it is necessary to apply on heat-spot the proofreader. Choosing color of the proofreader for masking of heat-spot, give preference to green color and dense texture. Green shades perfectly neutralize red color, allowing to make heat-spot less noticeable. You put the proofreader pointwise. If there is need, hammer him with fingertips, but do not smear. The group of the proofreader has to be rather thin, over it it will be necessary to put also concealer.

3. Choose concealer in tone of skin, its texture has to be dense, but it is good to be distributed on skin. Choosing concealer, pay also attention to that this camouflage means did not absorb powder. Some concealers, absorbing powder, do face "spotty". You put means pointwise over the proofreader, drive in it with fingertips. At the end you can powder heat-spot slightly. If you want to distract attention from heat-spots and reddenings, do contrast make-up with emphasis on eyes in cold tones.

Author: «MirrorInfo» Dream Team


Print