How independently to replace shower cabin

How independently to replace shower cabin

Change of shower cabin with new assumes the accurate address with all elements of connection - it is both pipes, and hoses, and collars, and electrical wiring. The attentive relation to carrying out dismantling will give the chance and installation of new cabin to execute so that subsequently with its operation there were no problems.

It is required to you

  • - new shower cabin with all spare parts;
  • - sealant;
  • - extension wrench.

Instruction

1. Execute dismantling of old shower cabin. For this purpose at first disconnect cabin from the power supply network. For convenience of work remove doors, remove corners and guides. Cut off water supply and disconnect the equipment from cold and hot-water supply. Carry out depressurization of joints between wall and pallet then remove pallet. Depending on model of shower cabin the sequence of carrying out operations can differ.

2. Release to yourself space for work. Remove old cabin, spare parts, collect garbage. Prepare new cabin for installation. It it is necessary to unpack and prepare all necessary tools.

3. Begin with pallet – twirl legs in seats, wrap nuts and washers. Use level to establish the basis as it is possible more exactly. Adjust legs that the equipment after installation would not warp on one side.

4. Establish into place siphon. Attach one end of hose to pallet, take away another to draining of the sewerage. Check, joints are how reliable – merge water bucket in pallet. So you make sure that connecting laying is established reliably and there are no leakages. It is possible to carry out processing by sealant in addition. Length of hose has to be enough to be connected to the sewerage.

5. Establish walls, partitions, attach roof. Put into place and adjust doors. Rollers have to be established so that doors could be closed without gaps and during operation of the device would not pass moisture.

6. Connect cabin to the power supply network. If the model which has been established before had normal socket, it is a high time to replace it with new which is specially intended for rooms with the increased humidity. It should be protected from hit of drops and splashes, and the arrangement of the socket has to be such that there was no wire tension. Bring cold and hot water to cabin.

Author: «MirrorInfo» Dream Team


Print