The Russian bath is famous around the world for the improving impact on the person. In it everything is made of natural materials. When the tree of walls, ceiling and shelves in sweating room heats up, it becomes natural inhaler. Wood does not burn human body even at very high temperature in bath. The master with own hand will be able to make furniture for bath to enjoy then salutary steam, lying on the product.
- - bars and boards;
- - self-tapping screws;
- - hacksaw.
1. In very small bath it is possible to place only one stove bench, but usually do two or three levels. For production of regiment use linden, birch, aspen and poplar. Make the sketch of product on paper, bring on it all necessary sizes.
2. Think of way of fastening of regiment – to floor or to wall. The sweating room wall where stove benches will be located, has to be the deaf. Be not going to dispose sitting too close to the oven, otherwise burns are possible. From ceiling to regiment there has to be distance not less than 110-120 cm. Between boards leave gap for moisture draining.
3. Choose not too thick boards that they managed to dry after use of sweating room. Supporting beams have at distance of 60-90 cm from each other. That the design was steady, by the lower end of bars attach rubber gaskets. Choose material qualitative, tes has to be purely planed without cracks and knots.
4. Boards and bars have to be executed from one type of wood that they heated up and absorbed moisture with identical speed. Consider steam-out zone when planning, otherwise you risk to be scalded. Under regiment it is necessary to make benches for bigger convenience of the taking a steam bath people.
5. Consider all these circumstances at flow calculation of wood and the location of regiment. Begin construction with production of framework from bars to which boards will fasten. Framework will have appearance of rectangles or triangles (when fixing regiment to wall). Fasten bars with self-tapping screws for tree.
6. Reliably attach frameworks to wall and floor of bath, use large self-tapping screws for durability. Now stack regiment boards on bars. Drown self-tapping screws more deeply in tree and put on the plastic caps put on glue heads. It becomes in order that the heated metal did not touch skin of the person.
7. In the same way make also shop below as not all can get on the most top level of regiment at once, they need time to get used to steam. Therefore be not surprised if the lower level enjoys at first bigger popularity, than top.