How to erase teflon cloth

How to erase teflon cloth

The teflon cloth enjoys invariable popularity among hostesses, and not only because of the practicality, but also due to attractiveness. Usually it is used as table covering – its special impregnation is resistant to moisture and pollution. Teflon is applied on color woven basis (linen, polyester, cotton, etc.) which long does not lose juiciness of paints. The product is easy in leaving, and it is often possible to manage damp cleaning. However washing can sometimes be necessary for cloth.

It is required to you

  • - sponge or rags;
  • - wooden rake;
  • - laundry soap;
  • - universal cleaning agent;
  • - washing machine automatic machine;
  • - laundry detergent;
  • - iron (in extreme cases).

Instruction

1. Try to clean the soiled teflon cloth, without removing it from table-top. Carefully wipe it damp foam sponge or rags; if necessary it is possible to use laundry soap or universal cleaning agent. Remove all residues of soapsuds, regularly moistening sponge in clear water.

2. Moisten the dried-up pollution then carefully scrape off them from cloth surface wooden rake. Previously blot dirty puddles with napkin and finish cleaning of table.

3. If after damp cleaning of cloth on surface there were hardly removed pollution, wash product manually in solution of laundry detergent or laundry soap. Such things usually well wash off. Watch that temperature of liquid was not higher than 30-40 degrees!

4. It is necessary to erase teflon cloth carefully, trying not to make on it zalom. Having removed all spots from product, do not unscrew it before drying at all. It is enough to stir up properly table covering over the bathroom – it will help to smooth folds and to remove excess moisture.

5. For washing of cloth with teflon impregnation in the automatic washing machine it is necessary to choose the sparing mode; optimum water temperature – as at hand wash. Surely disconnect extraction.

6. Hang up the washed product over the bathroom that water has flown down, and dry up it in the straightened state at the room temperature.

7. Try not to iron cloth not to damage teflon. It is quite simple to achieve it because at the correct leaving such products are almost not rumpled. If after all there is such need, walk on inner side of table covering not the really hot iron. At the same time it is not necessary to press heated sole to linen surface too strongly.

Author: «MirrorInfo» Dream Team


Print