Completely to change window drapery, it is not enough to pick up beautiful portyerny fabric and to find curtains of the necessary style. Not only the functionality of curtains, but also the general style of registration of window depends on way of their fastening to eaves. Try to make on the upper edge of curtain of opening and to frame them with decorative rings. To establish eyelets most, it is necessary to have good taste and eye estimation.
It is required to you
- Eyelets
- Sartorial meter
- Pencil
- Small scissors
- Press punch
- Lyuversny tape
- Iron
Instruction
1. Buy in department of woven accessories all necessary for installation of eyelets on curtains. The eyelet consists of two parts (front and back) which are latched among themselves in lock. It is possible to choose pads to match of curtains and eaves or, on the contrary, to place emphasis on them. The size of rings choose from 1.5 to 5 cm of diameter of internal circle from options. Buy self-adhesive tape for eyelets: longwise, equal width of curtain; width – in size of ring plus 2-3 cm. The tape will better record eyelets and will make drapery of accurater. At last, you need the press punch for eyelets and other rivets.
2. Strengthen tape self-bonding on the upper edge of curtain. It is possible to prepare curtain in advance, having processed its upper edge. In this case glue tape end-to-end to seam. If the edge of portyerny cloth is not processed, fix tape so: • leave from above allowance for podgibka, equal to width of lyuversny tape plus 3 cm • Having receded 1.5 cm, draw pencil the flat line.· on it lay tape and paste it the hot iron.· bend the top allowance and carefully iron it. • Turn in edge of curtain with the pasted tape and again iron it the hot iron.
3. Calculate necessary quantity of eyelets on curtain. Optimum distance between them 15-20 cm are considered – folds will lay down better. Make marks precisely on the center of future openings. In total the even quantity of eyelets that two side edges of curtain could be moved up to window has to turn out. You watch that the eyelet has not fallen on side seam.
4. Putting rings to marks, draw equal circles by internal part and cut them sharp scissors. Recede from the drawn circle on 1.5 cm. Inside diameter of pad has to be more eaves that curtains freely moved on it.
5. Put back part of eyelet, upward down – front decorative pad. The end result – the slightest mistake will depend on your accuracy, and all curtain will be spoiled. By means of the punch rivet rings, you will not hear easy click yet. If it was succeeded to establish successfully eyelets most, then your curtains will begin to look is accurate and modern.