To the cozy and warm house there is always a wish to return, but happens so that even at hot heating batteries the air temperature does not reach norm. There is set of ways to increase indoor temperature.
It is required to you
- - various heaters;
- - tools.
Instruction
1. For a start check, whether all as it should be with your windows. Insert plastic windows. It is desirable that they were bilocular. If you have no financial opportunity it to make, then old windows can be updated independently. For this purpose you need rubber sealant on glue basis. Before its pasting it is necessary to wash up absolutely windows, to degrease and wipe dry. If the frame leaky adjoins to glass, then the slot can be covered with normal putty. It is the best of all to carry out these procedures in the early fall.
2. Further check doors. The purpose is to eliminate drafts and therefore all slots have to be closed up, and the door is warmed. On the door basis from the inside it is necessary to paste soft air-tight stuffing. It is possible to buy materials in specialized shop, and it is possible to use also make-shifts, such as old cotton blanket and grandfather's leather raincoat. Slots between wall and door are eliminated at the expense of thresholds and rails.
3. If it is possible, warm floor and walls. For this purpose between draft and finished floors special heater creeps, and walls become on frame technology. Heat-insulated floors will be the excellent decision.
4. Pay attention to radiators. They should not be covered with dust, are closed by decorative boards, forced by furniture as it significantly reduces heat emission.
5. To increase efficiency of heating system, but not to overpay, put temperature regulators and temperature counters. Thanks to them, you will not need to heat the house when there is nobody or during warming.