For ensuring durability of the car which is stored in garage it is required to support the correct temperature condition. In the heated room, moisture evaporates much stronger therefore the risk of emergence of corrosion of metal significantly decreases. Some of the easiest and effective ways of heating of garage should recognize hot-water heating.
It is required to you
- - heating radiators;
- - boiler;
- - connection pipes;
- - fastening elements;
- - set of metalwork tools.
Instruction
1. Define for yourself whether you will construct autonomous hot-water heating of garage or you will use the central heating system existing in the house. The second option is more preferable if the garage is constructed near the house or is located under it.
2. Carry out from the house to the room where the car is located, pipes and establish radiator or separate heating contour there. Protect the highway on which from the home boiler water will be pumped thermal insulation from mineral wool or expanded polystyrene. If necessary install the additional pump in system to pump over water.
3. Establish the autonomous boiler house if you need to heat the garage installed separately from the house. Apply the same way of the device of hot-water heating at the equipment the heating system of several garages standing the friend near the friend.
4. Prepare radiators, boiler and connection pipes for mounting of heating services. Radiation of heat and its convection is the cornerstone of action of water system. The water heated in boiler circulates on pipes, giving part of the energy to the metal radiators having high heat conductivity. Batteries give heat, warming up garage indoor air.
5. Make general lay-out of elements of heating services and count expenses on its mounting. Consider length of pipes, the number of feature connectors and fixture during planning. Provide on the scheme of outcome and turns of the highway.
6. Carry out mounting of heating boiler, being guided by the instruction attached by the producer to the device. The boiler serves as the central element of all heating system therefore the efficiency of other components will depend on quality of its installation.
7. Attach wall dowels to garage walls. Hang on them radiators, using the hooks located on back surface. Have batteries at distance not less than 15 cm from garage floor.
8. Connect among themselves system elements by means of metal plastic pipes. Use fitting connections at pipe fitting. In the pipeline of autonomous system apply not water, but antifreeze to prevention of freezing of liquid.
9. Check heating services for working capacity. Pay attention to tightness of connections. In case of detection of leak carry out additional sealing of places of joining of heating appliances and the pipeline.