Additional warming at home needs to be spent always irrespective from what material walls are put up and the roof is made. It is possible to make it at once at wall construction or after the end of construction. Additional warming helps to keep up to 50% of heat and it is essential to save on heating.
It is required to you
- - paroizoliruyushchy materials;
- - the waterproofing materials;
- - heat-insulating materials.
Instruction
1. If you put up brick walls or blocks, then can carry out warming at once. For this purpose it is enough to make sinking masonry and to fill up wells with loose heaters. For this purpose slag from the boiler house or haydite will approach.
2. In process of laying you carry out charge and ram heaters by means of compacting stick. The sinking masonry allows not to carry out additional internal and external warming of walls, but does not exempt from additional works on warming of the basement and roof.
3. For warming of the basement you can use the paroizoliruyushchy or rolled waterproofing materials and to atop carry out warming by polyfoam, the rolled or pressed materials. As the rolled or pressed heaters use mineral wool. This material rather cheap, reliably warms and long serves. Works on warming can be carried out to few days. For this purpose it is enough to fix levels and to insert the pressed plates or to fit the basement rolled materials, fixing them on levels and self-tapping screws.
4. To carry out reliable warming of ceiling, fit it from the inside the paraisolating or waterproofing materials. Warm outer end at first waterproofing, then the rolled or pressed heaters, on them fix waterproofing layer again.
5. Instead of the specified way you can use filling materials, such as clay, earth, slag, haydite. At fill of any materials at first spill all seams liquid clay and then you carry out warming by fill. The layer of heaters has to be not less than 50-70 cm.
6. If you did not do sinking masonry or built the house of bar, logs, then at first pierce all seams tow, and then fit heaters.
7. At reliable external warming the internal warming is enough to be carried out only by paroizoliruyushchy materials or to waterproof for protection of walls against moisture.
8. Outside and inside you can make finishing at own discretion. Plaster, facing brick, siding will be suitable for exterior finish tes.