The polished furniture even the most high quality becomes covered by spots over time and grows dull. Painting, perhaps, the most available method of transformation of cabinets, dressers and other polished home decoration.
It is required to you
- Piece of furniture, the screw-driver, the degreasing means, joiner's putty, abrasive paper of average and small granularity, the construction hair dryer, the palette, rigid brush, primer, paints, the roller, brushes.
Instruction
1. Carry out preparatory work. Release piece of furniture which you were going to recolour. Remove doors and regiments, remove fasteners (loops, hooks). Carefully degrease polished surfaces by means of cleaning agent or alcohol. Attentively examine furniture on availability of chips, cracks, scratches. If you find them, surely eliminate. Accurately remove the cracked varnish around the damaged place, fill chip with joiner's putty. When the structure completely dries, process the restored place abrasive paper of small granularity.
2. There are two ways of repaint of the polished furniture. If at you the construction hair dryer is available, you can remove varnish from surface completely. Very accurately heat varnish covering and clean off its fragment behind fragment by means of the palette. Thus process each part. Further exempt wood from mordant layer, for this purpose use abrasive paper of average granularity. By means of rigid brush dust with furniture, formed after grinding. Once again degrease the processed surfaces.
3. If the construction hair dryer near at hand has not appeared, it is possible to resort to other way. After elimination of chips and defects by means of putty, carefully process all polished parts of furniture with abrasive paper of small granularity. The varnished covering is considered ready to painting if it became opaque and has become covered by risks from abrasive paper. Further also get rid by means of rigid brush of dust. Also start dressing, having previously once again degreased surface.
4. Put primer layer for tree. Ground and grind internal elements of boxes, doors and cabinets. Wait for full drying of primer. By means of abrasive paper of small granularity polish the decorated object.
5. The following step - painting. For this purpose you can use paints, varnish, mordant. Concerning paints there are no accurate rules what it is necessary to cover the polished furniture. There are coverings with rather pungent smells, but at the same time, quick-drying. For work you need the roller or brushes. Accurately paint all parts, watching that — that there was no gap left and drips. After paint completely dries, attentively examine all surfaces and as necessary put the second layer.