The fireplace represents kind of the furnace which has less massive laying and the open toplivnik having big furnace opening uses. It is established, generally for receiving esthetic pleasure.
Instruction
1. Before performance of work on installation of fireplace check flue. It has to be isolated, and its sizes have to correspond to model of your fireplace.
2. Take out all furniture and other things from the room or cover them with polyethylene film. Sort all elements of the furnace except for flue.
3. Note the center on flue wall and beat out opening diameter equal to diameter of chimney pipe.
4. Choose distance from floor to the central point of exit of chimney pipe depending on model of your fireplace. Consider height of floor plates and also knee height if the fireplace is connected to it.
5. Use the coupling for connection of fireplace to flue. Build in the coupling wall. Insert pipe (knee) into branch pipe of the oven and make sure that the opening for cleaning of pipe is located on vertical side of knee. The pipe (knee) has to adjoin densely to the coupling, at the same time neither the coupling, nor smoke pipe should not enter flue.
6. Before cement dries, make sure that the distance from floor to the coupling corresponds to fireplace height. After drying of cement continue installation works.
7. Establish pipe in fireplace branch pipe. Remove the furnace with pipe from wall on necessary distance that the pipe entered the coupling. At the same time the pipe should not enter flue directly. If pipe too long, truncate it to the sizes at which it will correspond to distance between fireplace and wall. In the presence of gap, isolate it sealant.
8. Check quality of installation of fireplace and its connection to flue.