Washing machines of the brand of Indesit, as a rule, are reliable and seldom fail at observance of service regulations. If such trouble after all has comprehended your household appliance, do not hurry to address to repair shop. You will be able to eliminate some of simple and widespread malfunctions of the washing machine by own efforts.
It is required to you
- - screw-driver;
- - set of wrenches;
- - tester.
Instruction
1. Use the built-in system of self-diagnostics for definition of type of fault of the washing machine of Indesit. At obvious failure of mechanisms and units on the liquid-crystal display the error code will be highlighted. Write out the code on the sheet of paper and be verified with the technical management attached to the household appliance. Having defined fault type, perform the operations recommended for its elimination.
2. If the washing machine does not heat water, check operability of the tubular electric heater (TENa). Remove back cover and find the TENa flange. Turn off on the flange nut until the end of thread and pressure her that the nut has gone against the stop to the flange.
3. Disconnect heating coil from the washing machine and check it tester. In case of fault of the heater replace it with new, having precisely picked up it for the power and type. If the heater is serviceable, possibly, more qualified diagnostics and the subsequent replacement of the thermostat or contacts of the relay will be required. Address in workshop on repair of household appliances.
4. Sometimes after the beginning of implementation of the program of washing the drum of the machine is not rotated. Switch-off the machine and check free wheeling of drum, consistently moving it diversely. In the absence of extraneous noises check belt tension.
5. Remove back wall of the washing machine. Examine the place of fastening of belt and make sure that it is safe and well tense. Check whether the engine pulley well rotates. At break of belt replace it with new. If the failure cause is not established, ask for the help professionals.
6. If the washing machine does not gather water or does it too slowly, check for a start whether the valve through which water is pumped to the machine is open up to the end. Turn off valve completely and again check the machine in work.
7. In addition turn off water feed hose which approaches the machine behind. Take out the wire mesh filter and wash out it in pollution case. If the taken measures have not resulted in result, the reason can consist in fault of the level switch of water. Without being qualified, do not try to make replacement of the relay independently, address to the service center Indesit.