Not always there is opportunity to buy new instead of the old fridge. Here it is also necessary to think out ways by means of which the old fridge can return attractive exterior. It is possible to make it, having stuck it with film self-bonding or having painted with special enamel.
It is required to you
- - film self-bonding;
- - silicone sealant;
- - enamel or paint;
- - pencil;
- - scissors;
- - ruler.
Instruction
1. It is possible to inhale new life in the old fridge in different ways. Everything depends on its defects. If in the body of the fridge there were cracks, call the master from the service center that he has looked and has told whether it is possible to stick them, or the fridge is not subject to repair any more.
2. Stick small cracks with silicone sealant. Previously defreeze the fridge, wipe its walls and carefully dry. Then attentively study the instruction to silicone sealant and grease with it the site, evenly polishing it on all surface. During operating time act according to the instruction which is specified on sealant (there it has to be written how many that has to dry before it is possible to turn on the unit).
3. It is desirable to find out the reason of emergence of crack also. If with fault to all strongly loaded regiments, try not to load more them from now on. Also the wall can crack because of the wrong mounting assembly by production. It happens even in rather new fridges. In this case address to shop where you bought the fridge, and replace it with better.
4. The door and external walls of the fridge will be perfectly refreshed by film - self-bonding or special enamel. For example, the door of the fridge can be pokleit cheerful film under color of kitchen or its separate elements. If you do not want to change cardinally exterior of the fridge, pokleyta door and sidewalls white film. The qualitative film is rather resistant to wear and is easily pasted to basis. For pokleyka of film measure the sizes of each part of the fridge (doors, side panels), cut off necessary piece of film, disunite it, having separated protective part, and paste the sticky party to the fridge.
5. Also paint the fridge white color by means of automobile paints and special enamels. It is desirable to choose enamel with spray, so you will be able to achieve more uniform layer, than by means of brush. Previously the surface which is supposed to be painted needs to be washed up and degreased properly.