One day the annoying situation can spoil mood: you include fork of the electric device in the socket, and the electric device is not started. And even with the naked eye it is visible that the cause of this breakage is in fork: word, it does not inspire trust. It is necessary to sort and make sure fork whether presentiments are right.
It is required to you
- - crosstip and flat blade screwdrivers with sting of the small size;
- - fork.
Instruction
1. Accurately sort fork, having unscrewed the self-tapping screw fixing electrofork cover by means of the screw-driver.
2. Find the screws used for fastening of wires on contacts of fork. Remove conductings and to insert screws into "ears". After that tighten screws on contacts of fork, and, the wire has to be oriented in the direction to the output of the body of electrofork.
3. Lay wires: do not assume that wires concerned each other. Besides, surely leave free space between conductings, the cover of the body will need to be fixed by means of the self-tapping screw and if not to leave space between conductings, then at assembly of fork the self-tapping screw it is possible to damage isolation of wires.
4. Accurately insert fork into cover: the plastic latch has to record reliably wires in the body. Finish plastic plate against the stop: it has to be latched. Make sure of correctness of landing of cover of fork then fix it by means of the self-tapping screw. Do not try to fasten fork cover more strong as by excessively shown force it is possible to strip thread and all enclosed efforts to repair fork will be vain.