How to wash stroke proofreader

How to wash stroke proofreader

The stroke proofreader is the liquid or dry correction fluid intended for correction of mistakes during any written works. Exist stroke proofreaders on water, spirit, emulsion basis and also in the form of tapes of rollers with the dry proofreader and on the basis of solvent. If correction fluid has got on clothes, then removal of pollution depends on its basis.

It is required to you

  • - alcohol-containing liquids;
  • - cotton pad;
  • - soap solution;
  • - laundry detergent;
  • - acetone;
  • - gasoline;
  • - white spirit;
  • - kerosene;
  • - solvent;
  • - liquid for varnish removal.

Instruction

1. If you have soiled clothesstrokewater-based proofreader, then to wash it will not make big work. Wash away the proofreader under flowing water with soap, wash product in the normal way suitable for fabrics of this type.

2. To wash the things soiled stroke proofreader on spirit basis carry out preliminary removal of spots by means of alcohol, vodka, cologne or tonic on spirit basis. For this purpose moisten cotton pad with alcohol-containing liquid, wipe places of pollution, wash thing in the normal way.

3. The emulsion basis stroke proofreader is mix of alcohol and water. For removal of pollution use alcohol-containing liquids. Apply on spot alcohol, cologne, vodka or other means with alcohol content by means of cotton pad, wash product in the normal way.

4. Most difficult the proofreader on the basis of solvent leaves. For its removal it is necessary to use aggressive means which are suitable not for all types of fabrics. Use solvent, acetone, white spirit, gasoline, kerosene or liquid for varnish removal. Put any of the specified funds for cotton pad, wipe spot, leave for 20 minutes, moisten new disk with any means, again wipe the place of pollution, wash product.

5. If you have soiled the proofreader on the basis of solvent silk, woolen, acetate, velvet things, then give them to dry-cleaner or paste applique as on the specified fabrics it is impossible to use aggressive substances to the place of pollution, otherwise instead of pollution you receive burned spot.

6. For removal stroke proofreader with tape roller, wet fabric in warm water with soap solution for 30-40 minutes, wring out, remove the adjusting tape, wash thing in the normal way suitable for fabrics of this type.

Author: «MirrorInfo» Dream Team


Print