The construction debris needs to be put away throughout the entire period of performance of work. First, it can constitute danger to people, and secondly, unnecessary objects litter site and considerably complicate work.
Main options of utilization of construction waste
Remember that part of construction waste should be not thrown out, and to send for processing that subsequently materials could be reused. If you are going to act this way, you should separate garbage into two categories. It is possible to send various metal junks which pieces of pipes, armature, part of metal designs, corners and many other things are among for processing. Also pieces of paper, cardboard, wood, plastic, rubber and glass enter this category. Separate all garbage and one part send for destruction, and another – for processing for reuse.
Utilization of construction waste can take place not only by processing. That its part which has no consumer value is liable to destruction, it is necessary to pick up suitable way only. First, it is possible to burn part of garbage. The problem is that at the same time combustion products which can be toxic will get to the atmosphere. Secondly, the garbage can be punched. This option is convenient if waste does not differ in hardness. Thirdly, it is possible to apply one of the most popular options – burial in the place specially allotted for this purpose.
There are two good ways to save when using construction waste. First, it can be sold. Many people buy beaten brick, crushed stone and other waste for the purposes. At the same time you will have opportunity to agree about shipment at own expense – it will solve the most part of problems with disposal of construction waste. Secondly, some waste can be reused if on site not only the dismantling of old designs, but also construction of new is conducted. Part of garbage is processed directly on the place. For example, reinforced concrete constructions sort then the largest pieces split up by means of hydrohammer and other special equipment.
What needs to be considered at utilization of construction waste
It is difficult even to take out some construction waste from site as they differ in too large volume and weight. In such cases the special equipment is quite often used. For example, there are crushers which allow not only to crush materials, but also to separate metal from concrete or to perform other works. It considerably simplifies process of further waste disposal. When there is need for such processing, appropriate not to buy special equipment, and to lease it. It is important to provide timely processing and utilization of construction waste. If there will be too much waste, it will become much more difficult to work. If to carry out utilization often, destroying small batches of garbage, it will be uneconomical. It is important to reach compromise in this question.