Inexpensive, but rather strong and esthetic, acrylic wall-paper attracts buyers with the practicality and wear resistance. After the goods are acquired, there is question of pokleyka of wall-paper.
Glue for acrylic wall-paper
Acrylic wall-paper can be glued both all-purpose adhesive, and special. If you have chosen for all room only wall-paper from acrylic, then it is better to use special glue which considers weight, material and necessary structure. As a rule, producers of wall-paper write what components have to contain in glue for the best hitch.
Wall-paper of this look does not love moisture, in order to avoid mold and fungus starch and antimicrobic additives have to be part of the glue chosen by you.
Choosing special wall-paper, the buyer gets number of advantages: - glue it is easy to part in water, formation of lumps, long storage in the divorced look (more than 10 days) is excluded; - thanks to the sliding layer when drawing wall-paper well joins and leveled; - such glue is not visible under wall-paper at all; - is eco-friendly and safe for human health as does not emit hazardous substances; - rather big effective life (it is possible to store in packing more than three years).
Acrylic wall-paper do not love damp rooms and what would glue was used, to keep in kitchen, in bathroom or other rooms with the increased humidity will not be.
Pokleyka of wall-paper
The technology of gluing of acrylic wall-paper a little in what differs from technologies for other types of wall-paper. The first step – surface preparation. Walls need to be cleaned from old paint, plaster, wall-paper. Cleaning of walls of dust and dirt is made, then the surface is degreased. For alignment the putty is used, after wall it is necessary to cover with primer. The second stage – glue preparation. To calculate amount of glue for all walls, it is enough to study packing on which surely specify expense.
For dissolution of glue follow the instruction: add dry mix gradually and stirring slowly, then the received mass will be homogeneous.
The following step – piece of cloth of wall-paper. To the measured length add about 5 centimeters, for the best adjustment. The cloth is put on horizontal firm surface, processed by glue, in such state it is necessary to leave wall-paper for several minutes that glue was slightly absorbed. Acrylic wall-paper can be glued by method "end-to-end" and "with an overlap". Smooth them from the center to edges. Do not air the room before full drying of wall-paper, acrylic do not maintain temperature drops. At right choice of glue and respect for technology of gluing of wall-paper your walls will pass big tests and will be long pleasing to the eye.