That putty for walls which meets requirements imposed to it is the best of all. For example, does not pass moisture in rooms with the increased humidity, it is well ground, does not shrink also cracks.
Instruction
1. When choosing the best putty for walls it is necessary to consider the field of its application. That is, whether you are going to use it for works indoors or on the contrary, to trim with it building facade. Apply putty with toxic elements which cannot be used for finishing of walls indoors at all to front works. The next moment – you have to be defined whether the processing stage putty starting or finishing will be. Because if you are going to putty walls under painting, then in final option at you the high quality layer capable to provide ideal basis for the subsequent painting has to turn out.
2. If you are going to pokleit walls wall-paper, you have no need to try strongly – to make even enough roughnesses and to remove too serious defects. Same concerns also processing of walls before drawing on them decorative plaster – you can also be limited to comparison of roughnesses. The best putty by right is considered acrylic. If you have repair in laundry, the bathroom, toilet or kitchen, choose this material for processing of walls as he is capable to protect reliably walls from gypsum cardboard, tree and concrete from moisture penetration. It is easily ground, does not shrink and does not burst.
3. Water and dispersive putty – eco-friendly elastic material with the increased adhesion and long life cycle. Such type of putty has a number of advantages before materials on the basis of plaster, cement or acrylic, but there is also shortcoming – quickly dries therefore it is necessary to store it in well closed container. Oil-adhesive putties are produced on the basis of drying oil. It leaves the mark on its application and you should consider it: as finishing finishing you will be able to use only drying oil or paint and varnish structures on its basis.
4. Plaster or cement materials are more better in comparison with oil-glue, but you need to think well before to buy them. The fact is that these structures are required to be parted and to mix carefully, and without certain experience it will be quite difficult to be made. Besides ready mix is subject to immediate expense, otherwise it will dry up, and it will raise material consumption. Apply this putty in rooms with big humidity and where walls experience mechanical influences.
5. Summing up the result, one may say, that that which meets all requirements imposed for it will be the best putty for walls. Dry powder is ideal for the subsequent paperhanging, and ready structure – for walls under painting. The qualitative structure always has uniform consistence without impregnations of firm fractions.