The condenser is a passive electronic component which has two poles with a certain or variable value of capacity. Still it has small conductivity. It is important to understand what it is necessary the condenser for in electric motor and car as according to information provided at forums many people have the wrong representation about it, and they just underestimate the importance of this device.
For what the condenser is necessary?
The device is used in all electric and radio engineering circuits. For what purposes turn on the condenser in the scheme:
- Acts as resistance that allows to use it as the filter to suppress VCh and LF of a hindrance.
- All apply to flashlights and lasers, and thanks to ability of the device to accumulate a charge and to be discharged quickly, creating an impulse.
- Helps to compensate reactive energy that allows to use it in the industry.
- Thanks to ability to accumulate and long time to keep a charge the condenser it is possible to use for saving information and for power supply of low-power devices.
For what the automobile condenser is necessary?
This device can perform several functions in the car. For example, they are used to create high rates of tension in all electric system in a car. Most often the condenser is used to automobile acoustics. Speaking about that why it is necessary condensates in an auto sound, we will notice that its main destination consists in the help to the amplifier quickly to give available capacity at peaks of low frequencies.
If in the speaker system the condenser is not used, then the sound of a bass will not be such accurate and also there can be a drawdown in food of all electrical network of the car. Similar power surges as a result can lead to the fact that the subwoofer will simply break.
When choosing the condenser for the car be guided by such rule that 1 F has to fall on 1 kW of power. Choose qualitative condensers and it is the is best of all if at them is laughter of management of a charge.
Once you also find out, it is correct to install the condenser. It is the best of all to do it most close to the sabvuferny amplifier as the biggest loading is the share of it. The distance should not be more than 60 cm. Connection type – parallel.
Why the condenser in the electric motor is necessary?
For the correct operation of some engines it is necessary to use starting and working condensers. The main destination of the starting condenser consists in increase in starting characteristics of the engine. This device helps to reduce engine entrance time to its operating mode, at the same time to increase the turning moment and to facilitate engine start process.
As for the working condenser, it is involved in work for all operating time of the engine. This device provides admissible with norms heating of windings, optimum load ability and profitability of the electric motor. Still it promotes the maximum torque and increase in service life of the engine.
Now it is necessary to find out what condenser is necessary for the engine. Capacity of this device usually gets out of calculation that has to fall on 100 W 6.6 mf. Sometimes this value is incorrect therefore it is the best of all to select capacity by experiments. There is several way of selection, but the most exact values can be received thanks to connection of the engine via the ampermeter. It is important to check the consumed current at different tanks. The task is in finding at what capacity the value of current on the ampermeter will be minimum.