Any line imagines a continuous number of points. In order that to build it, it is necessary to know the provision of these points, and the number of necessary coordinates for different types of lines will be a miscellaneous. To draw a straight line, the nobility where there are two points is enough, corners between different pieces, for curved or wavy — curvature radius are necessary for a curve. Computer programs give the chance to build practically any line.
It is required to you
- - computer with AutoCAD;
- - line type.
Instruction
1. Define type of the line which you need to build. It can be a straight line, a piece, a beam, the broken line, a circle, the polyline limiting a polygon. The way of construction depends on a look. In the AutoCAD program anyway you need the Drawing panel. You will find it in the Main tab in the top menu.
2. Find line type necessary to you. There is direct, wavy, a circle, the polyline. Press the necessary button. Having chosen the Straight line function, you have an opportunity to construct it or using a mouse, or having entered coordinates of two points. In the first case just click a mouse on a screen point where there has to be a basic point. Find just the same way also the second. But it is possible to enter in a command line coordinates at first of a basic point, and then and the second. Horizontal and vertical lines can be constructed by means of the corresponding buttons in the Drawing menu.
3. For creation of the line at an angle to already available more conveniently to turn the drawing so that the initial line was horizontal. But it is not obligatory. Just as at creation of the first line, enter the Drawing menu, choose the button with the image of a straight line, and further — the option "Corner". Find the Basic Line button in a context menu, at the same time the cursor has to change. Specify the necessary tilt angle and coordinates of points through which there passes the new line in a command line. The broken line represents a number of the pieces located at an angle to each other. Therefore it is possible to build it separate fragments, having taken the previous piece as a basis. If coordinates of initial and final points coincide, at you the wrong polygon will turn out.
4. Mn is the most convenient to build the line limiting a regular polygon by means of team ". - ug.", which you will find in the same Drawing panel. The program will offer you three options. It can be the entered or described polygon or with the given size of the party. Having chosen the polyline, you will see a window into which it is necessary to enter the necessary number of the parties on the screen. Coordinates of the center are set or click of a mouse across the field, or in a command line. Through the Drawing menu also the circle representing the line which all points are equally removed from the center is under construction.