The generator of the car is a device which is responsible for transformation of mechanical energy from rotation of the crankshaft in electric energy. It ensures functioning of the ignition system, lighting fixtures, a charge of the accumulator, botovy dashboard, and trouble-free operation of the majority of systems, the device consists of two parts: a mobile part - the rotor and not mobile – the stator. Average power of the device is equal to 1 kW, generally its is enough for ensuring necessary energy, but if level is reduced, it is possible to try to increase it independently. Further you learn how to increase generator power the hands, without the assistance of the mechanic.
How to increase the power of the automobile generator?
In order that the power of the device became higher, it is necessary to replace a winding of rotor coils with a copper wire of big section.
For work it is required:
- copper wire of big section;
- gloves;
- flat-nose pliers;
- tester with the indicator;
- soldering iron;
- degreasing means (alcohol, detergent for ware);
- varnish for impregnation of a winding.
If all necessary for work is prepared, then it is possible to start.
- For a start take the sheet of paper and carefully sketch the scheme of a winding with primary arrangement of rounds and schemes of exits of contacts.
- After that put on gloves and passatizham unwind the available winding.
- When coils are released, they need to be degreased carefully alcohol or washing for ware.
- Take the prepared wire, and well pulling it, reel up on the coil. You watch that the wire laid down exactly and densely, at the same time it is necessary to consider quantity of rounds of winding.
- When the wire is on the place, it is necessary to smooth out its edges and to check them for short circuit by means of a tester.
- If everything met normally, it is possible to isolate exits and to solder them to contacts.
- The winding covering a varnish coat will be a further step, and only after its full drying it is possible to connect wires by means of the soldering iron.